| Uncharted 3: Drake's Deception | |
|---|---|
| Developer(s) | Naughty Dog |
| Publisher(s) | Sony Computer Entertainment |
| Series | Uncharted |
| GameID(s) | |
| Quick links | Check Compatibility Open Issues Search Google Wikipedia Page |
Configuration
Options that deviate from RPCS3's default settings and provide the best experience with this title are listed below.
GPU configuration
| Setting | Option | Notes |
|---|---|---|
| Resolution scale | 100 | Resolution scaling is only supported when the MLAA patch is enabled. |
| Write color buffers | On | Fixes where some scenes are too bright. |
Advanced configuration
| Setting | Option | Notes |
|---|---|---|
| Accurate RSX reservation access | On | To be enabled on systems that do not have TSX. |
| PPU LLVM Java mode handling | Provides additional gameplay stability and stops frequent trap errors from occurring. |
Known Issues
There are no reported issues with this title.
Special Notes
Patches
Anchors:
uc3_100_FPS: &uc3_100_FPS
- [ be32, 0x0093b348, 0x90e30034 ] #FPS
- [ be32, 0x0093b34c, 0x90e30038 ] #Unlock
uc3_100_mlaa: &uc3_100_mlaa
- [ be32, 0x00635f90, 0x60000000 ] # nop byte write on 00 9c
- [ be16, 0x0093b46c, 0x9b83 ] # store 0
#- [ be32, 0x00720340, 0x480009ac ] # unconditonally branch to disable MLAA
# This patch cycles through various post-processing modes. Values accepted are:
# 0 = None
# 1 = Bloom
# 2 = Depth of Field
# 3 = ??? (Tonemapping)
# 4 = Bloom & Depth of Field
# 5 = Bloom & Depth of Field & Tonemapping (Default)
uc3_100_post: &uc3_100_post
- [ be32, 0x0093acd4, 0x39000003 ] # Post-processing modes (mem address: 0x1346D47)
uc3_100_mesh: &uc3_100_mesh
- [ be32, 0x0073f05c, 0x980b0004 ] # Disable mesh trimming (mem address: 0x12C3940)
# Many settings below are enabled/disabled in sub_AA9E6C. In this subroutine, // needs correction on subroutine
# r6 = 2
# r27 = 1
# r28 = 0
# and these are stored into some memory blob to represent settings. Most values can be switched by just changing the
# source register from one to the other, though some are words and some are bytes, so be careful.
uc3_100_ssao: &uc3_100_ssao
- [ be32, 0x00635f8c, 0x60000000 ] # nop byte write on 00 57
- [ be32, 0x0093b3ac, 0x9b830057 ] # Disable SSAO (mem address: 0x1346DBF)
uc3_100_dof: &uc3_100_dof
- [ be32, 0x0093b430, 0x9b83007a ] # Disable Depth of Field (mem address: 0x1346DE2)
uc3_100_speed: &uc3_100_speed
- [ be32, 0x0093b44c, 0x9b830081 ] # Speedup (WCB) (mem address: 0x1346DE9)
uc3_100_dbv: &uc3_100_dbv
- [ be32, 0x0093b6b8, 0x9b6302f9 ] # Depth buffer viewport (mem address: 0x1347061)
uc3_100_dbf: &uc3_100_dbf
- [ be32, 0x0093b6f8, 0x9b83031d ] # Depth border fix (mem address: 0x1347085)
uc3_100_db: &uc3_100_db
- [ be32, 0x00635f88, 0x60000000 ] # nop byte write on 03 ec
- [ be32, 0x0093b704, 0x90e303ec ] # Depth buffer (mem address: 0x1347157)
uc3_JP_100_mlaa: &uc3_JP_100_mlaa
- [ be32, 0x00635fb8, 0x60000000 ] # nop byte write on 00 9c
- [ be16, 0x0093b494, 0x9b83 ] # store 0
#- [ be32, 0x00720368, 0x480009ac ] # unconditonally branch to disable MLAA
# This patch cycles through various post-processing modes. Values accepted are:
# 0 = None
# 1 = Bloom
# 2 = Depth of Field
# 3 = ??? (Tonemapping)
# 4 = Bloom & Depth of Field
# 5 = Bloom & Depth of Field & Tonemapping (Default)
uc3_JP_100_post: &uc3_JP_100_post
- [ be32, 0x0093acfc, 0x39000003 ] # Post-processing modes
uc3_JP_100_mesh: &uc3_JP_100_mesh
- [ be32, 0x0073f084, 0x980b0004 ] # Disable mesh trimming
# Many settings below are enabled/disabled in sub_93B2C0. In this subroutine,
# r6 = 2
# r27 = 1
# r28 = 0
# and these are stored into some memory blob to represent settings. Most values can be switched by just changing the
# source register from one to the other, though some are words and some are bytes, so be careful.
uc3_JP_100_ssao: &uc3_JP_100_ssao
- [ be32, 0x00635fb4, 0x60000000 ] # nop byte write on 00 57
- [ be32, 0x0093b3d4, 0x9b830057 ] # Disable SSAO
uc3_JP_100_dof: &uc3_JP_100_dof
- [ be32, 0x0093b458, 0x9b83007a ] # Disable Depth of Field
uc3_JP_100_speed: &uc3_JP_100_speed
- [ be32, 0x0093b474, 0x9b830081 ] # Speedup (WCB)
uc3_JP_100_dbv: &uc3_JP_100_dbv
- [ be32, 0x0093b6e0, 0x9b6302f9 ] # Depth buffer viewport
uc3_JP_100_dbf: &uc3_JP_100_dbf
- [ be32, 0x0093b720, 0x9b83031d ] # Depth border fix
uc3_JP_100_db: &uc3_JP_100_db
- [ be32, 0x00635fb0, 0x60000000 ] # nop byte write on 03 ec
- [ be32, 0x0093b72c, 0x90e303ec ] # Depth buffer = 2
uc3_110_mlaa: &uc3_110_mlaa
- [ be32, 0x0063e014, 0x60000000 ] # nop byte write on 00 9c
- [ be16, 0x0094d850, 0x9b83 ] # store 0
#- [ be32, 0x00728cac, 0x480009ac ] # unconditonally branch to disable MLAA
# Beginning of new blooom code
- [ be16, 0x0077bd92, 0xfd40 ]
- [ byte, 0x0077bdb7, 0xb0 ]
- [ byte, 0x0077be4b, 0xb0 ]
- [ be32, 0x0077bdb0, 0x4bfacf01 ]
- [ be32, 0x00728cb0, 0xc1a907d4 ]
- [ be32, 0x00728cb4, 0x808907d8 ]
# Desert storm
- [ be32, 0x00728cb8, 0x80beacb4 ]
- [ be32, 0x00728cbc, 0x7f842800 ]
- [ be32, 0x00728cc0, 0x409d0030 ]
# Deflicker check
- [ be32, 0x00728cc4, 0x80be3e6c ]
- [ be32, 0x00728cc8, 0x7f842800 ]
- [ be32, 0x00728ccc, 0x409d0018 ]
# Yemen: Talbot chase
- [ be32, 0x00728cd0, 0x80be1144 ]
- [ be32, 0x00728cd4, 0x7f842800 ]
- [ be32, 0x00728cd8, 0x409d0018 ]
# Talbot multiplier 0.5
- [ be32, 0x00728cdc, 0x38a00068 ]
- [ be32, 0x00728ce0, 0x48000008 ]
# Desert storm multiplier 0.04
- [ be32, 0x00728ce4, 0x38a0edc8 ]
# Value correction
- [ be32, 0x00728ce8, 0x7d85f42e ]
- [ be32, 0x00728cec, 0xedad0332 ]
- [ be32, 0x00728cf0, 0x4e800020 ]
# Yemen temple Dof Correction
- [ be32, 0x0077b864, 0x4bfad491 ]
- [ be32, 0x00728cf4, 0xc07d08dc ]
- [ be32, 0x00728cf8, 0x801d07e8 ]
- [ be32, 0x00728d00, 0x409c000c ]
- [ be32, 0x00728d04, 0xc29e0068 ]
- [ be32, 0x00728d08, 0xec630532 ]
- [ be32, 0x00728d0c, 0x4e800020 ]
uc3_110_mb: &uc3_110_mb
- [ be32, 0x0077aacc, 0x480000c4 ] # Disable motion blur
# This patch cycles through various post-processing modes. Values accepted are:
# 0 = None
# 1 = Bloom
# 2 = Depth of Field
# 3 = ??? (Tonemapping)
# 4 = Bloom & Depth of Field
# 5 = Bloom & Depth of Field & Tonemapping (Default)
uc3_110_post: &uc3_110_post
- [ be32, 0x0094d0b8, 0x39000003 ] # Post-processing modes (mem address: 0x1376F77)
uc3_110_mesh: &uc3_110_mesh
- [ be32, 0x00747b0c, 0x980b0004 ] # Disable mesh trimming (mem address: 0x12D5A70)
# Many settings below are enabled/disabled in sub_AA9E6C. In this subroutine, // needs correction on subroutine
# r6 = 2
# r27 = 1
# r28 = 0
# and these are stored into some memory blob to represent settings. Most values can be switched by just changing the
# source register from one to the other, though some are words and some are bytes, so be careful.
uc3_110_ssao: &uc3_110_ssao
- [ be32, 0x0063e010, 0x60000000 ] # nop byte write on 00 57
- [ be32, 0x0094d790, 0x9b830057 ] # Disable SSAO (mem address: 0x1376FEF)
uc3_110_dof: &uc3_110_dof
- [ be32, 0x0094d814, 0x9b83007a ] # Disable Depth of Field (mem address: 0x1377012)
uc3_110_speed: &uc3_110_speed
- [ be32, 0x0094d830, 0x9b830081 ] # Speedup (WCB) (mem address: 0x1377019)
uc3_110_dbv: &uc3_110_dbv
- [ be32, 0x0094da9c, 0x9b6302f9 ] # Depth buffer viewport (mem address: 0x1377291)
uc3_110_dbf: &uc3_110_dbf
- [ be32, 0x0094dadc, 0x9b83031d ] # Depth border fix (mem address: 0x13772B5)
uc3_110_db: &uc3_110_db
- [ be32, 0x0063e00c, 0x60000000 ] # nop byte write on 03 ec
- [ be32, 0x0094dae8, 0x90e303ec ] # Depth buffer = 2 (mem address: 0x1377387)
uc3_110_torch: &uc3_110_torch
- [ be32, 0x00763d30, 0x60000000 ] #Torch light disable
uc3_119_FPS: &uc3_119_FPS
- [ be32, 0x0096e980, 0x3b6000da ] #FPS
- [ be32, 0x0096e97c, 0x48000040 ] #Unlock
uc3_119_mlaa: &uc3_119_mlaa
- [ be32, 0x0064df28, 0x60000000 ] # nop byte write on 00 9c
- [ be16, 0x0096eaa0, 0x9b83 ] # store 0
#- [ be32, 0x0073a1d8, 0x480009ac ] # unconditonally branch to disable MLAA
# Beginning of new blooom code
- [ be16, 0x0078c3aa, 0x1530 ]
- [ byte, 0x0078c3cf, 0xb0 ]
- [ byte, 0x0078c463, 0xb0 ]
- [ be32, 0x0078c3c8, 0x4bfade15 ]
- [ be32, 0x0073a1dc, 0xc1a907d4 ]
- [ be32, 0x0073a1e0, 0x808907d8 ]
# Desert storm
- [ be32, 0x0073a1e4, 0x80beacec ]
- [ be32, 0x0073a1e8, 0x7f842800 ]
- [ be32, 0x0073a1ec, 0x409d0030 ]
# Deflicker check
- [ be32, 0x0073a1f0, 0x80be5774 ]
- [ be32, 0x0073a1f4, 0x7f842800 ]
- [ be32, 0x0073a1f8, 0x409d0018 ]
# Yemen: Talbot chase
- [ be32, 0x0073a1fc, 0x80be2a34 ]
- [ be32, 0x0073a200, 0x7f842800 ]
- [ be32, 0x0073a204, 0x409d0018 ]
# Talbot multiplier 0.5
- [ be32, 0x0073a208, 0x38a015f4 ]
- [ be32, 0x0073a20c, 0x48000008 ]
# Desert storm multiplier 0.04
- [ be32, 0x0073a210, 0x38a01474 ]
# Value correction
- [ be32, 0x0073a214, 0x7d85f42e ]
- [ be32, 0x0073a218, 0xedad0332 ]
- [ be32, 0x0073a21c, 0x4e800020 ]
# Yemen temple Dof Correction
- [ be32, 0x0078be7c, 0x4bfae3a5 ]
- [ be32, 0x0073a220, 0xc07d08dc ]
- [ be32, 0x0073a224, 0x801d07e8 ]
- [ be32, 0x0073a22c, 0x409c000c ]
- [ be32, 0x0073a230, 0xc29e2998 ]
- [ be32, 0x0073a234, 0xec630532 ]
- [ be32, 0x0073a238, 0x4e800020 ]
uc3_119_mb: &uc3_119_mb
- [ be32, 0x0078b0e4, 0x480000c4 ] # Disable motion blur
# This patch cycles through various post-processing modes. Values accepted are:
# 0 = None
# 1 = Bloom
# 2 = Depth of Field
# 3 = ??? (Tonemapping)
# 4 = Bloom & Depth of Field
# 5 = Bloom & Depth of Field & Tonemapping (Default)
uc3_119_post: &uc3_119_post
- [ be32, 0x0096e308, 0x39000003 ] # Post-processing modes (mem address: 0x1386547)
uc3_119_mesh: &uc3_119_mesh
- [ be32, 0x0075811c, 0x980b0004 ] # Disable mesh trimming (mem address: 0x12E0DF0)
# Many settings below are enabled/disabled in sub_96E8CC. In this subroutine,
# r6 = 2
# r27 = 1
# r28 = 0
# and these are stored into some memory blob to represent settings. Most values can be switched by just changing the
# source register from one to the other, though some are words and some are bytes, so be careful.
uc3_119_ssao: &uc3_119_ssao
- [ be32, 0x0064df24, 0x60000000 ] # nop byte write on 00 57
- [ be32, 0x0096e9e0, 0x9b830057 ] # Disable SSAO (mem address: 0x13865BF)
uc3_119_dof: &uc3_119_dof
- [ be32, 0x0096ea64, 0x9b83007a ] # Disable Depth of Field (mem address: 0x13865E2)
uc3_119_speed: &uc3_119_speed
- [ be32, 0x0096ea80, 0x9b830081 ] # Speedup (WCB) (mem address: 0x13865E9)
uc3_119_dbv: &uc3_119_dbv
- [ be32, 0x0096ecec, 0x9b6302f9 ] # Depth buffer viewport (mem address: 0x1386861)
uc3_119_dbf: &uc3_119_dbf
- [ be32, 0x0096ed2c, 0x9b83031d ] # Depth border fix (mem address: 0x1386885)
uc3_119_db: &uc3_119_db
- [ be32, 0x0064df20, 0x60000000 ] # nop byte write on 03 ec
- [ be32, 0x0096ed38, 0x90e303ec ] # Depth buffer = 2 (mem address: 0x1386957)
uc3_119_torch: &uc3_119_torch
- [ be32, 0x00774350, 0x60000000 ] # Torch light disable
uc3_119_devplus: &uc3_119_devplus
- [ be16, 0x00d9ea48, 0x202b ] # _+
- [ be32, 0x0112cb94, 0x01381D1E ] # base ptr
- [ be32, 0x0112cb90, 0x00df5880 ] # str
- [ be32, 0x0002f4c0, 0x38dc009f ] # vis
- [ be32, 0x0112cb98, 0x00df5610 ] # str
- [ be32, 0x0002f500, 0x38dc4acb ] # wireframe
- [ be32, 0x0112cb9c, 0x00df5628 ] # str
- [ be32, 0x0002f53c, 0x38dc4acc ] # see through
- [ be32, 0x0112cba0, 0x00df5648 ] # str
- [ be32, 0x0002f578, 0x38dc4acd ] # point
- [ be32, 0x0112cba4, 0x00df7308 ] # str
- [ be32, 0x0002f5b4, 0x38dc48e6 ] # post on spu
- [ be32, 0x0112cba8, 0x00df6cf0 ] # str
- [ be32, 0x0002f5f0, 0x38dc48c4 ] # dof
- [ be32, 0x0112cbac, 0x00df6ed8 ] # str
- [ be32, 0x0002f62c, 0x38dc48c1 ] # mb // overwrites itself
- [ be32, 0x0112cbb0, 0x00da05c0 ] # str
- [ be32, 0x0002f668, 0x38dc48f1 ] # red wireframe
- [ be32, 0x0112cbb4, 0x00da05a8 ] # str
- [ be32, 0x0002f6a4, 0x38dc48be ] # wireframe ball
- [ be32, 0x0112cc74, 0x00da0590 ] # str
- [ be32, 0x0112cc78, 0x011D0F90 ] # ptr show vox to Disable Death Zone
- [ be32, 0x0112cc7c, 0x00da0530 ] # str
- [ be32, 0x0112cc80, 0x0137F441 ] # ptr "Log Vox To SPU TTY" to Disable Death Collision
- [ be32, 0x0112cc84, 0x00da0548 ] # str
- [ be32, 0x0112cc88, 0x0120C5C0 ] # ptr "Include Rejected Vox" to Disable NPC Spawn
- [ be32, 0x0112cc8c, 0x00da0570 ] # str
- [ be32, 0x0112cc90, 0x01343F95 ] # ptr "Log Vox Lookups to TTY" to Make Invulnerable
- [ be32, 0x0112cc64, 0x01343F84 ] # ptr
- [ be32, 0x0112cc68, 0x00da05e0 ]
# Disable Death Collision
- [ be64, 0x00da0530, 0x44697361626C6520 ]
- [ be64, 0x00da0538, 0x446561746820436F ]
- [ be64, 0x00da053f, 0x6C6C6973696F6E00 ]
# Disallow Npcs from Spawning
- [ be64, 0x00da0548, 0x446973616C6C6F77 ]
- [ be64, 0x00da0550, 0x204E706373206672 ]
- [ be64, 0x00da0558, 0x6F6D20537061776E ]
- [ be32, 0x00da0560, 0x696E6700 ]
# Make Invulnerable
- [ be64, 0x00da0570, 0x4D616B6520496E76 ]
- [ be64, 0x00da0578, 0x756C6E657261626C ]
- [ be16, 0x00da0580, 0x6500 ]
# Enable Death Zone
- [ be64, 0x00da0590, 0x456E61626C652044 ]
- [ be64, 0x00da0598, 0x65617468205A6F6E ]
- [ be16, 0x00da05a0, 0x6500 ]
# Enable Wireframe Balls
- [ be64, 0x00da05a8, 0x456E61626C652057 ]
- [ be64, 0x00da05b0, 0x6972656672616D65 ]
- [ be64, 0x00da05b8, 0x2042616C6C730000 ]
# Enable Red Wireframe
- [ be64, 0x00da05c0, 0x456E61626C652052 ]
- [ be64, 0x00da05c8, 0x6564205769726566 ]
- [ be32, 0x00da05d0, 0x72616D65 ]
# NPC Model Scale
- [ be64, 0x00da05e0, 0x4E5043204D6F6465 ]
- [ be64, 0x00da05e8, 0x6C205363616C6500 ]
debugmenunotesUC3: &debugmenunotesUC3 "L3 + Start = Dev Menu\nL3 + Select = Quick Menu\nL3 + Triangle = Debug Text\nL2 + R2 = Debug Fly"
uc3mlaanotes: &uc3mlaanotes "Allows for the use of Resolution Scaling in the title and also improves performance.\nVersion 2.0 Fixes high levels of Bloom in some areas. (1.10 and 1.19 Only)"
uc3gpulightingnotes: &uc3gpulightingnotes "Uses GPU (RSX) path for lighting effects instead of SPU.\nFixes rendering of lightning effects that are being rendered broken via SPU path and greatly improves performance over it.\nThis path is incomplete and results in some missing effects such as Volumetric lighting."
uc3_119title: &uc3_119title
"Uncharted 3: Drake's Deception":
BCES01175: [ 01.19 ]
BCES01670: [ 01.19 ]
BCUS98233: [ 01.19 ]
BCJS37004: [ 02.17 ]
NPEA00422: [ 01.19 ]
uc3_100title: &uc3_100title
"Uncharted 3: Drake's Deception":
BCES01175: [ 01.00 ]
BCUS98233: [ 01.00 ]
PPU-49c96996b6f3c0b32422375978c41e0c7ed95183:
Unlock FPS:
Games: *uc3_100title
Author: superepic31
Notes: Haven't tested how this affects cutscenes.
Patch Version: 1.0
Patch:
- [ load, *uc3_100_FPS ]
Disable in-built MLAA:
Games: *uc3_100title
Author: Whatcookie
Notes: *uc3mlaanotes
Patch Version: 1.0
Patch:
- [ load, *uc3_100_mlaa ]
Post-processing Modes:
Games: *uc3_100title
Author: ZEROx, illusion
Notes:
Patch Version: 1.0
Patch:
- [ load, *uc3_100_post ]
Disable Mesh Trimming:
Games: *uc3_100title
Author: ZEROx, illusion
Notes:
Patch Version: 1.0
Patch:
- [ load, *uc3_100_mesh ]
Disable SSAO:
Games: *uc3_100title
Author: ZEROx, illusion
Notes:
Patch Version: 1.0
Patch:
- [ load, *uc3_100_ssao ]
Disable Depth of Field:
Games: *uc3_100title
Author: ZEROx, illusion
Notes:
Patch Version: 1.0
Patch:
- [ load, *uc3_100_dof ]
Performance (WCB):
Games: *uc3_100title
Author: ZEROx, illusion
Notes: Enable this patch if you are using "Write Color Buffers" to restore performance.
Patch Version: 1.0
Patch:
- [ load, *uc3_100_speed ]
Depth Buffer Viewport:
Games: *uc3_100title
Author: ZEROx, illusion
Notes:
Patch Version: 1.0
Patch:
- [ load, *uc3_100_dbv ]
Depth Border Fix:
Games: *uc3_100title
Author: ZEROx, illusion
Notes:
Patch Version: 1.0
Patch:
- [ load, *uc3_100_dbf ]
Enable GPU Lighting:
Games: *uc3_100title
Author: ZEROx, illusion
Notes: *uc3gpulightingnotes
Patch Version: 1.0
Patch:
- [ load, *uc3_100_db ]
Debug Menu:
Games: *uc3_100title
Author: dron_3, HdHereidme, illusion
Notes: *debugmenunotesUC3
Patch Version: 1.0
Patch:
- [ be16, 0x00041e34, 0x419e ]
PPU-48fa849dfeaef2f36ec042a576f29bda19ec1de0:
Disable in-built MLAA:
Games:
"Uncharted 3: Drake's Deception":
BCJS37004: [ 01.00 ]
Author: Whatcookie
Notes: *uc3mlaanotes
Patch Version: 1.0
Patch:
- [ load, *uc3_JP_100_mlaa ]
Post-processing Modes:
Games:
"Uncharted 3: Drake's Deception":
BCJS37004: [ 01.00 ]
Author: ZEROx, illusion
Notes:
Patch Version: 1.0
Patch:
- [ load, *uc3_JP_100_post ]
Disable Mesh Trimming:
Games:
"Uncharted 3: Drake's Deception":
BCJS37004: [ 01.00 ]
Author: ZEROx, illusion
Notes:
Patch Version: 1.0
Patch:
- [ load, *uc3_JP_100_mesh ]
Disable SSAO:
Games:
"Uncharted 3: Drake's Deception":
BCJS37004: [ 01.00 ]
Author: ZEROx, illusion
Notes:
Patch Version: 1.0
Patch:
- [ load, *uc3_JP_100_ssao ]
Disable Depth of Field:
Games:
"Uncharted 3: Drake's Deception":
BCJS37004: [ 01.00 ]
Author: ZEROx, illusion
Notes:
Patch Version: 1.0
Patch:
- [ load, *uc3_JP_100_dof ]
Performance (WCB):
Games:
"Uncharted 3: Drake's Deception":
BCJS37004: [ 01.00 ]
Author: ZEROx, illusion
Notes: Enable this patch if you are using "Write Color Buffers" to restore performance.
Patch Version: 1.0
Patch:
- [ load, *uc3_JP_100_speed ]
Depth Buffer Viewport:
Games:
"Uncharted 3: Drake's Deception":
BCJS37004: [ 01.00 ]
Author: ZEROx, illusion
Notes:
Patch Version: 1.0
Patch:
- [ load, *uc3_JP_100_dbv ]
Depth Border Fix:
Games:
"Uncharted 3: Drake's Deception":
BCJS37004: [ 01.00 ]
Author: ZEROx, illusion
Notes:
Patch Version: 1.0
Patch:
- [ load, *uc3_JP_100_dbf ]
Enable GPU Lighting:
Games:
"Uncharted 3: Drake's Deception":
BCJS37004: [ 01.00 ]
Author: ZEROx, illusion
Notes: *uc3gpulightingnotes
Patch Version: 1.0
Patch:
- [ load, *uc3_JP_100_db ]
Debug Menu:
Games:
"Uncharted 3: Drake's Deception":
BCJS37004: [ 01.00 ]
Author: dron_3, HdHereidme, illusion
Notes: *debugmenunotesUC3
Patch Version: 1.0
Patch:
- [ be16, 0x00041e34, 0x419e ]
PPU-664fb0e4a94c62c15a6474841c202fb2bf80ce16:
Disable in-built MLAA:
Games:
"Uncharted 3: Drake's Deception":
BCES01670: [ 01.10 ]
Author: Whatcookie, ZEROx
Notes: *uc3mlaanotes
Patch Version: 2.0
Patch:
- [ load, *uc3_110_mlaa ]
Disable Motion Blur:
Games:
"Uncharted 3: Drake's Deception":
BCES01670: [ 01.10 ]
Author: ZEROx
Notes:
Patch Version: 1.0
Patch:
- [ load, *uc3_110_mb ]
Disable Bloom:
Games:
"Uncharted 3: Drake's Deception":
BCES01670: [ 01.10 ]
Author: ZEROx, illusion
Notes:
Patch Version: 1.0
Patch:
- [ load, *uc3_110_post ]
Disable Mesh Trimming:
Games:
"Uncharted 3: Drake's Deception":
BCES01670: [ 01.10 ]
Author: ZEROx, illusion
Notes:
Patch Version: 1.0
Patch:
- [ load, *uc3_110_mesh ]
Disable SSAO:
Games:
"Uncharted 3: Drake's Deception":
BCES01670: [ 01.10 ]
Author: ZEROx, illusion
Notes:
Patch Version: 1.0
Patch:
- [ load, *uc3_110_ssao ]
Disable Depth of Field:
Games:
"Uncharted 3: Drake's Deception":
BCES01670: [ 01.10 ]
Author: ZEROx, illusion
Notes:
Patch Version: 1.0
Patch:
- [ load, *uc3_110_dof ]
Performance (WCB):
Games:
"Uncharted 3: Drake's Deception":
BCES01670: [ 01.10 ]
Author: ZEROx, illusion
Notes: Enable this patch if you are using "Write Color Buffers" to restore performance.
Patch Version: 1.0
Patch:
- [ load, *uc3_110_speed ]
Depth Buffer Viewport:
Games:
"Uncharted 3: Drake's Deception":
BCES01670: [ 01.10 ]
Author: ZEROx, illusion
Notes:
Patch Version: 1.0
Patch:
- [ load, *uc3_110_dbv ]
Depth Border Fix:
Games:
"Uncharted 3: Drake's Deception":
BCES01670: [ 01.10 ]
Author: ZEROx, illusion
Notes:
Patch Version: 1.0
Patch:
- [ load, *uc3_110_dbf ]
Enable GPU Lighting:
Games:
"Uncharted 3: Drake's Deception":
BCES01670: [ 01.10 ]
Author: ZEROx, illusion
Notes: *uc3gpulightingnotes
Patch Version: 1.0
Patch:
- [ load, *uc3_110_db ]
Disable Torch shadow maps:
Games:
"Uncharted 3: Drake's Deception":
BCES01670: [ 01.10 ]
Author: ZEROx
Notes: Disables incorrectly rendered type of shadow maps.
Patch Version: 1.0
Patch:
- [ load, *uc3_110_torch ]
Debug Menu:
Games:
"Uncharted 3: Drake's Deception":
BCES01670: [ 01.10 ]
Author: dron_3, HdHereidme, illusion
Notes: *debugmenunotesUC3
Patch Version: 1.0
Patch:
- [ be16, 0x00042624, 0x419e ]
PPU-02a88c3c6cd415b0bb81f1606bc743835881a4ba:
Unlock FPS:
Games: *uc3_119title
Author: superepic31
Notes: Haven't tested how this affects cutscenes.
Patch Version: 1.0
Patch:
- [ load, *uc3_119_FPS ]
Disable in-built MLAA:
Games: *uc3_119title
Author: Whatcookie, ZEROx
Notes: *uc3mlaanotes
Patch Version: 2.0
Patch:
- [ load, *uc3_119_mlaa ]
Disable Motion Blur:
Games: *uc3_119title
Author: ZEROx
Notes:
Patch Version: 1.0
Patch:
- [ load, *uc3_119_mb ]
Disable Bloom:
Games: *uc3_119title
Author: ZEROx, illusion
Notes:
Patch Version: 1.0
Patch:
- [ load, *uc3_119_post ]
Disable Mesh Trimming:
Games: *uc3_119title
Author: ZEROx, illusion
Notes:
Patch Version: 1.0
Patch:
- [ load, *uc3_119_mesh ]
Disable SSAO:
Games: *uc3_119title
Author: ZEROx, illusion
Notes:
Patch Version: 1.0
Patch:
- [ load, *uc3_119_ssao ]
Disable Depth of Field:
Games: *uc3_119title
Author: ZEROx, illusion
Notes:
Patch Version: 1.0
Patch:
- [ load, *uc3_119_dof ]
Performance (WCB):
Games: *uc3_119title
Author: ZEROx, illusion
Notes: Enable this patch if you are using "Write Color Buffers" to restore performance.
Patch Version: 1.0
Patch:
- [ load, *uc3_119_speed ]
Depth Buffer Viewport:
Games: *uc3_119title
Author: ZEROx, illusion
Notes:
Patch Version: 1.0
Patch:
- [ load, *uc3_119_dbv ]
Depth Border Fix:
Games: *uc3_119title
Author: ZEROx, illusion
Notes:
Patch Version: 1.0
Patch:
- [ load, *uc3_119_dbf ]
Enable GPU Lighting:
Games: *uc3_119title
Author: ZEROx, illusion
Notes: *uc3gpulightingnotes
Patch Version: 1.0
Patch:
- [ load, *uc3_119_db ]
Disable Torch shadow maps:
Games: *uc3_119title
Author: ZEROx
Notes: Disables incorrectly rendered type of shadow maps.
Patch Version: 1.0
Patch:
- [ load, *uc3_119_torch ]
Debug Menu:
Games: *uc3_119title
Author: dron_3, HdHereidme, illusion
Notes: *debugmenunotesUC3
Patch Version: 1.0
Patch:
- [ be16, 0x00042814, 0x419e ]
Dev Menu Plus:
Games: *uc3_119title
Author: illusion, Skye Modz
Notes: "Last modified: December 14 2020\nReplaces audio options with various debug features."
Patch Version: 1.0
Patch:
- [ load, *uc3_119_devplus ]