| Uncharted 3: Drake's Deception | |
|---|---|
| Developer(s) | Naughty Dog |
| Publisher(s) | Sony Computer Entertainment |
| Series | Uncharted |
| GameID(s) | |
| Quick links | Check Compatibility Open Issues Search Google Wikipedia Page |
Configuration
Options that deviate from RPCS3's default settings and provide the best experience with this title are listed below.
GPU configuration
| Setting | Option | Notes |
|---|---|---|
| Renderer | Vulkan | Recommended to get the best performance. |
| Resolution scale | 100 | Resolution scaling is only supported when the MLAA patch is enabled. |
| Write color buffers | On | Fixes where some scenes are too bright. |
Advanced configuration
| Setting | Option | Notes |
|---|---|---|
| Accurate RSX reservation access | On | To be enabled on systems that do not have TSX. |
Known Issues
There are no reported issues with this title.
Special Notes
Patches
Anchors:
uc3_100_FPS: &uc3_100_FPS
- [ be32, 0x0093b348, 0x90e30034 ] #FPS
- [ be32, 0x0093b34c, 0x90e30038 ] #Unlock
uc3_100_mlaa: &uc3_100_mlaa
- [ be32, 0x00720340, 0x480009ac ] # unconditonally branch to disable MLAA
# This patch cycles through various post-processing modes. Values accepted are:
# 0 = None
# 1 = Bloom
# 2 = Depth of Field
# 3 = ??? (Tonemapping)
# 4 = Bloom & Depth of Field
# 5 = Bloom & Depth of Field & Tonemapping (Default)
uc3_100_post: &uc3_100_post
- [ be32, 0x0093acd4, 0x39000003 ] # Post-processing modes (mem address: 0x1346D47)
uc3_100_mesh: &uc3_100_mesh
- [ be32, 0x0073f05c, 0x980b0004 ] # Disable mesh trimming (mem address: 0x12C3940)
# Many settings below are enabled/disabled in sub_AA9E6C. In this subroutine, // needs correction on subroutine
# r6 = 2
# r27 = 1
# r28 = 0
# and these are stored into some memory blob to represent settings. Most values can be switched by just changing the
# source register from one to the other, though some are words and some are bytes, so be careful.
uc3_100_ssao: &uc3_100_ssao
- [ be32, 0x00635f8c, 0x60000000 ] # nop byte write on 00 57
- [ be32, 0x0093b3ac, 0x9b830057 ] # Disable SSAO (mem address: 0x1346DBF)
uc3_100_dof: &uc3_100_dof
- [ be32, 0x0093b430, 0x9b83007a ] # Disable Depth of Field (mem address: 0x1346DE2)
uc3_100_speed: &uc3_100_speed
- [ be32, 0x0093b44c, 0x9b830081 ] # Speedup (WCB) (mem address: 0x1346DE9)
uc3_100_dbv: &uc3_100_dbv
- [ be32, 0x0093b6b8, 0x9b6302f9 ] # Depth buffer viewport (mem address: 0x1347061)
uc3_100_dbf: &uc3_100_dbf
- [ be32, 0x0093b6f8, 0x9b83031d ] # Depth border fix (mem address: 0x1347085)
uc3_100_db: &uc3_100_db
- [ be32, 0x00635f88, 0x60000000 ] # nop byte write on 03 ec
- [ be32, 0x0093b704, 0x90e303ec ] # Depth buffer (mem address: 0x1347157)
uc3_100_spulighting: &uc3_100_spulighting
- [ be32, 0x0074c2f8, 0x48000010 ]
uc3_JP_100_mlaa: &uc3_JP_100_mlaa
- [ be32, 0x00720368, 0x480009ac ] # unconditonally branch to disable MLAA
# This patch cycles through various post-processing modes. Values accepted are:
# 0 = None
# 1 = Bloom
# 2 = Depth of Field
# 3 = ??? (Tonemapping)
# 4 = Bloom & Depth of Field
# 5 = Bloom & Depth of Field & Tonemapping (Default)
uc3_JP_100_post: &uc3_JP_100_post
- [ be32, 0x0093acfc, 0x39000003 ] # Post-processing modes
uc3_JP_100_mesh: &uc3_JP_100_mesh
- [ be32, 0x0073f084, 0x980b0004 ] # Disable mesh trimming
# Many settings below are enabled/disabled in sub_93B2C0. In this subroutine,
# r6 = 2
# r27 = 1
# r28 = 0
# and these are stored into some memory blob to represent settings. Most values can be switched by just changing the
# source register from one to the other, though some are words and some are bytes, so be careful.
uc3_JP_100_ssao: &uc3_JP_100_ssao
- [ be32, 0x00635fb4, 0x60000000 ] # nop byte write on 00 57
- [ be32, 0x0093b3d4, 0x9b830057 ] # Disable SSAO
uc3_JP_100_dof: &uc3_JP_100_dof
- [ be32, 0x0093b458, 0x9b83007a ] # Disable Depth of Field
uc3_JP_100_speed: &uc3_JP_100_speed
- [ be32, 0x0093b474, 0x9b830081 ] # Speedup (WCB)
uc3_JP_100_dbv: &uc3_JP_100_dbv
- [ be32, 0x0093b6e0, 0x9b6302f9 ] # Depth buffer viewport
uc3_JP_100_dbf: &uc3_JP_100_dbf
- [ be32, 0x0093b720, 0x9b83031d ] # Depth border fix
uc3_JP_100_db: &uc3_JP_100_db
- [ be32, 0x00635fb0, 0x60000000 ] # nop byte write on 03 ec
- [ be32, 0x0093b72c, 0x90e303ec ] # Depth buffer = 2
uc3_JP_100_spulighting: &uc3_JP_100_spulighting
- [ be32, 0x0074c320, 0x48000010 ]
uc3_110_mlaa: &uc3_110_mlaa
- [ be32, 0x00728cac, 0x480009ac ] # unconditonally branch to disable MLAA
uc3_110_mb: &uc3_110_mb
- [ be32, 0x00779ff0, 0x480008b0 ] # Disable
- [ be32, 0x0077aacc, 0x480000c4 ] # motion
- [ be32, 0x00a411ac, 0x480001a4 ] # blur
# This patch cycles through various post-processing modes. Values accepted are:
# 0 = None
# 1 = Bloom
# 2 = Depth of Field
# 3 = ??? (Tonemapping)
# 4 = Bloom & Depth of Field
# 5 = Bloom & Depth of Field & Tonemapping (Default)
uc3_110_post: &uc3_110_post
- [ be32, 0x0094d0b8, 0x39000003 ] # Post-processing modes (mem address: 0x1376F77)
uc3_110_mesh: &uc3_110_mesh
- [ be32, 0x00747b0c, 0x980b0004 ] # Disable mesh trimming (mem address: 0x12D5A70)
# Many settings below are enabled/disabled in sub_AA9E6C. In this subroutine, // needs correction on subroutine
# r6 = 2
# r27 = 1
# r28 = 0
# and these are stored into some memory blob to represent settings. Most values can be switched by just changing the
# source register from one to the other, though some are words and some are bytes, so be careful.
uc3_110_ssao: &uc3_110_ssao
- [ be32, 0x0063e010, 0x60000000 ] # nop byte write on 00 57
- [ be32, 0x0094d790, 0x9b830057 ] # Disable SSAO (mem address: 0x1376FEF)
uc3_110_dof: &uc3_110_dof
- [ be32, 0x0094d814, 0x9b83007a ] # Disable Depth of Field (mem address: 0x1377012)
uc3_110_speed: &uc3_110_speed
- [ be32, 0x0094d830, 0x9b830081 ] # Speedup (WCB) (mem address: 0x1377019)
uc3_110_dbv: &uc3_110_dbv
- [ be32, 0x0094da9c, 0x9b6302f9 ] # Depth buffer viewport (mem address: 0x1377291)
uc3_110_dbf: &uc3_110_dbf
- [ be32, 0x0094dadc, 0x9b83031d ] # Depth border fix (mem address: 0x13772B5)
uc3_110_db: &uc3_110_db
- [ be32, 0x0063e00c, 0x60000000 ] # nop byte write on 03 ec
- [ be32, 0x0094dae8, 0x90e303ec ] # Depth buffer = 2 (mem address: 0x1377387)
uc3_110_spulighting: &uc3_110_spulighting
- [ be32, 0x00754da0, 0x48000010 ]
uc3_119_FPS: &uc3_119_FPS
- [ be32, 0x0096e980, 0x3b6000da ] #FPS
- [ be32, 0x0096e97c, 0x48000040 ] #Unlock
uc3_119_mlaa: &uc3_119_mlaa
- [ be32, 0x0073a1d8, 0x480009ac ] # unconditonally branch to disable MLAA
uc3_119_mb: &uc3_119_mb
- [ be32, 0x0078a608, 0x480008b0 ] # Disable
- [ be32, 0x0078b0e4, 0x480000c4 ] # motion
- [ be32, 0x00a6b8e8, 0x480001a4 ] # blur
# This patch cycles through various post-processing modes. Values accepted are:
# 0 = None
# 1 = Bloom
# 2 = Depth of Field
# 3 = ??? (Tonemapping)
# 4 = Bloom & Depth of Field
# 5 = Bloom & Depth of Field & Tonemapping (Default)
uc3_119_post: &uc3_119_post
- [ be32, 0x0096e308, 0x39000003 ] # Post-processing modes (mem address: 0x1386547)
uc3_119_mesh: &uc3_119_mesh
- [ be32, 0x0075811c, 0x980b0004 ] # Disable mesh trimming (mem address: 0x12E0DF0)
# Many settings below are enabled/disabled in sub_96E8CC. In this subroutine,
# r6 = 2
# r27 = 1
# r28 = 0
# and these are stored into some memory blob to represent settings. Most values can be switched by just changing the
# source register from one to the other, though some are words and some are bytes, so be careful.
uc3_119_ssao: &uc3_119_ssao
- [ be32, 0x0064df24, 0x60000000 ] # nop byte write on 00 57
- [ be32, 0x0096e9e0, 0x9b830057 ] # Disable SSAO (mem address: 0x13865BF)
uc3_119_dof: &uc3_119_dof
- [ be32, 0x0096ea64, 0x9b83007a ] # Disable Depth of Field (mem address: 0x13865E2)
uc3_119_speed: &uc3_119_speed
- [ be32, 0x0096ea80, 0x9b830081 ] # Speedup (WCB) (mem address: 0x13865E9)
uc3_119_dbv: &uc3_119_dbv
- [ be32, 0x0096ecec, 0x9b6302f9 ] # Depth buffer viewport (mem address: 0x1386861)
uc3_119_dbf: &uc3_119_dbf
- [ be32, 0x0096ed2c, 0x9b83031d ] # Depth border fix (mem address: 0x1386885)
uc3_119_db: &uc3_119_db
- [ be32, 0x0064df20, 0x60000000 ] # nop byte write on 03 ec
- [ be32, 0x0096ed38, 0x90e303ec ] # Depth buffer = 2 (mem address: 0x1386957)
uc3_119_spulighting: &uc3_119_spulighting
- [ be32, 0x007653c0, 0x48000010 ]
PPU-49c96996b6f3c0b32422375978c41e0c7ed95183:
Unlock FPS:
Games:
"Uncharted 3: Drake's Deception":
BCES01175: [ 01.00 ]
BCUS98233: [ 01.00 ]
Author: superepic31
Notes: Haven't tested how this affects cutscenes.
Patch Version: 1.0
Patch:
- [ load, *uc3_100_FPS ]
Disable in-built MLAA:
Games:
"Uncharted 3: Drake's Deception":
BCES01175: [ 01.00 ]
BCUS98233: [ 01.00 ]
Author: Whatcookie
Notes: Allows for the use of Resolution Scaling in the title and also improves performance. However, please note that this patch causes a few issues such as incorrect bloom effect. However, this issues can be addressed with the post-processing patch below.
Patch Version: 1.0
Patch:
- [ load, *uc3_100_mlaa ]
Post-processing Modes:
Games:
"Uncharted 3: Drake's Deception":
BCES01175: [ 01.00 ]
BCUS98233: [ 01.00 ]
Author: ZEROx, illusion
Notes:
Patch Version: 1.0
Patch:
- [ load, *uc3_100_post ]
Disable Mesh Trimming:
Games:
"Uncharted 3: Drake's Deception":
BCES01175: [ 01.00 ]
BCUS98233: [ 01.00 ]
Author: ZEROx, illusion
Notes:
Patch Version: 1.0
Patch:
- [ load, *uc3_100_mesh ]
Disable SSAO:
Games:
"Uncharted 3: Drake's Deception":
BCES01175: [ 01.00 ]
BCUS98233: [ 01.00 ]
Author: ZEROx, illusion
Notes:
Patch Version: 1.0
Patch:
- [ load, *uc3_100_ssao ]
Disable Depth of Field:
Games:
"Uncharted 3: Drake's Deception":
BCES01175: [ 01.00 ]
BCUS98233: [ 01.00 ]
Author: ZEROx, illusion
Notes:
Patch Version: 1.0
Patch:
- [ load, *uc3_100_dof ]
Performance (WCB):
Games:
"Uncharted 3: Drake's Deception":
BCES01175: [ 01.00 ]
BCUS98233: [ 01.00 ]
Author: ZEROx, illusion
Notes: Enable this patch if you are using "Write Color Buffers" to restore performance.
Patch Version: 1.0
Patch:
- [ load, *uc3_100_speed ]
Depth Buffer Viewport:
Games:
"Uncharted 3: Drake's Deception":
BCES01175: [ 01.00 ]
BCUS98233: [ 01.00 ]
Author: ZEROx, illusion
Notes:
Patch Version: 1.0
Patch:
- [ load, *uc3_100_dbv ]
Depth Border Fix:
Games:
"Uncharted 3: Drake's Deception":
BCES01175: [ 01.00 ]
BCUS98233: [ 01.00 ]
Author: ZEROx, illusion
Notes:
Patch Version: 1.0
Patch:
- [ load, *uc3_100_dbf ]
Depth Buffer:
Games:
"Uncharted 3: Drake's Deception":
BCES01175: [ 01.00 ]
BCUS98233: [ 01.00 ]
Author: ZEROx, illusion
Notes:
Patch Version: 1.0
Patch:
- [ load, *uc3_100_db ]
Disable SPU Lighting:
Games:
"Uncharted 3: Drake's Deception":
BCES01175: [ 01.00 ]
BCUS98233: [ 01.00 ]
Author: ZEROx
Notes:
Patch Version: 1.0
Patch:
- [ load, *uc3_100_spulighting ]
PPU-48fa849dfeaef2f36ec042a576f29bda19ec1de0:
Disable in-built MLAA:
Games:
"Uncharted 3: Drake's Deception":
BCJS37004: [ 01.00 ]
Author: Whatcookie
Notes: Allows for the use of Resolution Scaling in the title and also improves performance. However, please note that this patch causes a few issues such as incorrect bloom effect. However, this issues can be addressed with the post-processing patch below.
Patch Version: 1.0
Patch:
- [ load, *uc3_JP_100_mlaa ]
Post-processing Modes:
Games:
"Uncharted 3: Drake's Deception":
BCJS37004: [ 01.00 ]
Author: ZEROx, illusion
Notes:
Patch Version: 1.0
Patch:
- [ load, *uc3_JP_100_post ]
Disable Mesh Trimming:
Games:
"Uncharted 3: Drake's Deception":
BCJS37004: [ 01.00 ]
Author: ZEROx, illusion
Notes:
Patch Version: 1.0
Patch:
- [ load, *uc3_JP_100_mesh ]
Disable SSAO:
Games:
"Uncharted 3: Drake's Deception":
BCJS37004: [ 01.00 ]
Author: ZEROx, illusion
Notes:
Patch Version: 1.0
Patch:
- [ load, *uc3_JP_100_ssao ]
Disable Depth of Field:
Games:
"Uncharted 3: Drake's Deception":
BCJS37004: [ 01.00 ]
Author: ZEROx, illusion
Notes:
Patch Version: 1.0
Patch:
- [ load, *uc3_JP_100_dof ]
Performance (WCB):
Games:
"Uncharted 3: Drake's Deception":
BCJS37004: [ 01.00 ]
Author: ZEROx, illusion
Notes: Enable this patch if you are using "Write Color Buffers" to restore performance.
Patch Version: 1.0
Patch:
- [ load, *uc3_JP_100_speed ]
Depth Buffer Viewport:
Games:
"Uncharted 3: Drake's Deception":
BCJS37004: [ 01.00 ]
Author: ZEROx, illusion
Notes:
Patch Version: 1.0
Patch:
- [ load, *uc3_JP_100_dbv ]
Depth Border Fix:
Games:
"Uncharted 3: Drake's Deception":
BCJS37004: [ 01.00 ]
Author: ZEROx, illusion
Notes:
Patch Version: 1.0
Patch:
- [ load, *uc3_JP_100_dbf ]
Depth Buffer:
Games:
"Uncharted 3: Drake's Deception":
BCJS37004: [ 01.00 ]
Author: ZEROx, illusion
Notes:
Patch Version: 1.0
Patch:
- [ load, *uc3_JP_100_db ]
Disable SPU Lighting:
Games:
"Uncharted 3: Drake's Deception":
BCJS37004: [ 01.00 ]
Author: ZEROx, illusion
Notes:
Patch Version: 1.0
Patch:
- [ load, *uc3_JP_100_spulighting ]
PPU-664fb0e4a94c62c15a6474841c202fb2bf80ce16:
Disable in-built MLAA:
Games:
"Uncharted 3: Drake's Deception":
BCES01670: [ 01.10 ]
Author: Whatcookie
Notes: Allows for the use of Resolution Scaling in the title and also improves performance. However, please note that this patch causes a few issues such as incorrect bloom effect. However, this issues can be addressed with the post-processing patch below.
Patch Version: 1.0
Patch:
- [ load, *uc3_110_mlaa ]
Disable Motion Blur:
Games:
"Uncharted 3: Drake's Deception":
BCES01670: [ 01.10 ]
Author: ZEROx
Notes:
Patch Version: 1.0
Patch:
- [ load, *uc3_110_mb ]
Post-processing Modes:
Games:
"Uncharted 3: Drake's Deception":
BCES01670: [ 01.10 ]
Author: ZEROx, illusion
Notes:
Patch Version: 1.0
Patch:
- [ load, *uc3_110_post ]
Disable Mesh Trimming:
Games:
"Uncharted 3: Drake's Deception":
BCES01670: [ 01.10 ]
Author: ZEROx, illusion
Notes:
Patch Version: 1.0
Patch:
- [ load, *uc3_110_mesh ]
Disable SSAO:
Games:
"Uncharted 3: Drake's Deception":
BCES01670: [ 01.10 ]
Author: ZEROx, illusion
Notes:
Patch Version: 1.0
Patch:
- [ load, *uc3_110_ssao ]
Disable Depth of Field:
Games:
"Uncharted 3: Drake's Deception":
BCES01670: [ 01.10 ]
Author: ZEROx, illusion
Notes:
Patch Version: 1.0
Patch:
- [ load, *uc3_110_dof ]
Performance (WCB):
Games:
"Uncharted 3: Drake's Deception":
BCES01670: [ 01.10 ]
Author: ZEROx, illusion
Notes: Enable this patch if you are using "Write Color Buffers" to restore performance.
Patch Version: 1.0
Patch:
- [ load, *uc3_110_speed ]
Depth Buffer Viewport:
Games:
"Uncharted 3: Drake's Deception":
BCES01670: [ 01.10 ]
Author: ZEROx, illusion
Notes:
Patch Version: 1.0
Patch:
- [ load, *uc3_110_dbv ]
Depth Border Fix:
Games:
"Uncharted 3: Drake's Deception":
BCES01670: [ 01.10 ]
Author: ZEROx, illusion
Notes:
Patch Version: 1.0
Patch:
- [ load, *uc3_110_dbf ]
Depth Buffer:
Games:
"Uncharted 3: Drake's Deception":
BCES01670: [ 01.10 ]
Author: ZEROx, illusion
Notes:
Patch Version: 1.0
Patch:
- [ load, *uc3_110_db ]
Disable SPU Lighting:
Games:
"Uncharted 3: Drake's Deception":
BCES01670: [ 01.10 ]
Author: ZEROx
Notes:
Patch Version: 1.0
Patch:
- [ load, *uc3_110_spulighting ]
PPU-02a88c3c6cd415b0bb81f1606bc743835881a4ba:
Unlock FPS:
Games:
"Uncharted 3: Drake's Deception":
BCES01175: [ 01.19 ]
BCES01670: [ 01.19 ]
BCUS98233: [ 01.19 ]
BCJS37004: [ 02.17 ]
Author: superepic31
Notes: Haven't tested how this affects cutscenes.
Patch Version: 1.0
Patch:
- [ load, *uc3_119_FPS ]
Disable in-built MLAA:
Games:
"Uncharted 3: Drake's Deception":
BCES01175: [ 01.19 ]
BCES01670: [ 01.19 ]
BCUS98233: [ 01.19 ]
BCJS37004: [ 02.17 ]
Author: Whatcookie
Notes: Allows for the use of Resolution Scaling in the title and also improves performance. However, please note that this patch causes a few issues such as incorrect bloom effect. However, this issues can be addressed with the post-processing patch below.
Patch Version: 1.0
Patch:
- [ load, *uc3_119_mlaa ]
Disable Motion Blur:
Games:
"Uncharted 3: Drake's Deception":
BCES01175: [ 01.19 ]
BCES01670: [ 01.19 ]
BCUS98233: [ 01.19 ]
BCJS37004: [ 02.17 ]
Author: ZEROx
Notes:
Patch Version: 1.0
Patch:
- [ load, *uc3_119_mb ]
Post-processing Modes:
Games:
"Uncharted 3: Drake's Deception":
BCES01175: [ 01.19 ]
BCES01670: [ 01.19 ]
BCUS98233: [ 01.19 ]
BCJS37004: [ 02.17 ]
Author: ZEROx, illusion
Notes:
Patch Version: 1.0
Patch:
- [ load, *uc3_119_post ]
Disable Mesh Trimming:
Games:
"Uncharted 3: Drake's Deception":
BCES01175: [ 01.19 ]
BCES01670: [ 01.19 ]
BCUS98233: [ 01.19 ]
BCJS37004: [ 02.17 ]
Author: ZEROx, illusion
Notes:
Patch Version: 1.0
Patch:
- [ load, *uc3_119_mesh ]
Disable SSAO:
Games:
"Uncharted 3: Drake's Deception":
BCES01175: [ 01.19 ]
BCES01670: [ 01.19 ]
BCUS98233: [ 01.19 ]
BCJS37004: [ 02.17 ]
Author: ZEROx, illusion
Notes:
Patch Version: 1.0
Patch:
- [ load, *uc3_119_ssao ]
Disable Depth of Field:
Games:
"Uncharted 3: Drake's Deception":
BCES01175: [ 01.19 ]
BCES01670: [ 01.19 ]
BCUS98233: [ 01.19 ]
BCJS37004: [ 02.17 ]
Author: ZEROx, illusion
Notes:
Patch Version: 1.0
Patch:
- [ load, *uc3_119_dof ]
Performance (WCB):
Games:
"Uncharted 3: Drake's Deception":
BCES01175: [ 01.19 ]
BCES01670: [ 01.19 ]
BCUS98233: [ 01.19 ]
BCJS37004: [ 02.17 ]
Author: ZEROx, illusion
Notes: Enable this patch if you are using "Write Color Buffers" to restore performance.
Patch Version: 1.0
Patch:
- [ load, *uc3_119_speed ]
Depth Buffer Viewport:
Games:
"Uncharted 3: Drake's Deception":
BCES01175: [ 01.19 ]
BCES01670: [ 01.19 ]
BCUS98233: [ 01.19 ]
BCJS37004: [ 02.17 ]
Author: ZEROx, illusion
Notes:
Patch Version: 1.0
Patch:
- [ load, *uc3_119_dbv ]
Depth Border Fix:
Games:
"Uncharted 3: Drake's Deception":
BCES01175: [ 01.19 ]
BCES01670: [ 01.19 ]
BCUS98233: [ 01.19 ]
BCJS37004: [ 02.17 ]
Author: ZEROx, illusion
Notes:
Patch Version: 1.0
Patch:
- [ load, *uc3_119_dbf ]
Depth Buffer:
Games:
"Uncharted 3: Drake's Deception":
BCES01175: [ 01.19 ]
BCES01670: [ 01.19 ]
BCUS98233: [ 01.19 ]
BCJS37004: [ 02.17 ]
Author: ZEROx, illusion
Notes:
Patch Version: 1.0
Patch:
- [ load, *uc3_119_db ]
Disable SPU Lighting:
Games:
"Uncharted 3: Drake's Deception":
BCES01175: [ 01.19 ]
BCES01670: [ 01.19 ]
BCUS98233: [ 01.19 ]
BCJS37004: [ 02.17 ]
Author: ZEROx
Notes:
Patch Version: 1.0
Patch:
- [ load, *uc3_119_spulighting ]