Help:Peripherals and accessories

RPCS3 supports some USB peripherals through a system called USB passthrough. The supported devices will appear to games the same way as they would when plugged in to a real console, allowing games to discover and communicate with the USB accessories that they support.

Note that hotplugging is not supported yet, which means that the USB devices must be connected before launching the game and remain connected for the entire session.

cellUsbd Device Whitelist

To avoid interference from various USB devices on your PC, RPCS3 only exposes devices which have been whitelisted. At the time of writing, this list includes:

• Skylanders Portal
• Lego Dimensions Portal
• Kamen Rider Summonride Portal
• Disney Infinity Base
• Singstar Microphone (currently not working as it uses the streaming USB protocol)
• Guitar Hero Guitar
• Guitar Hero Drums
• Guitar Hero Live Guitar
• DJ Hero Turntable
• Harmonix Guitar
• Harmonix Drums
• Harmonix Keyboard
• Harmonix Button Guitar
• Harmonix Real Guitar
• lgFF_c283_c29b (a group of Logitech wheels supported by GT5/6)
• lgFF_ca03_ca03 (Logitech wheels supported by GT6)
• Thrustmaster RGT FFB Pro
• Thrustmaster F430
• Thrustmaster FFB
• Thrustmaster TRS
• Thrustmaster T500 RS Gear Shift
• Oculus DK 1
• Buzz Buzzers
• GCon3 Gun
• uDraw GameTablet
• PlayTV DVB-T Tuner (SCEH-0036)
• EA Sports Active 2 Dongle

cellUsbd Set-up Instructions

RPCS3 needs to be able to communicate to the USB device directly. This requires some setup from the user.

On Windows

• You need to make your device use WinUSB drivers. For this, a popular and respected software is Zadig.
• IF you need to REVERT the driver changes, to make the device work with other software, the procedure is:
  1. Go to device manager, the device will be listed under "Universal Serial Bus Devices", right click on it,
  2. Properties => Driver => Update Driver => Browse my computer for driver software => Let me pick... => USB Input Device (or whatever the previous driver was).

On Linux

Create a file called /etc/udev/rules.d/99-ps3-peripherals.rules (you will need root permissions to create this file), and fill it with the following:

SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", MODE="0666"

Note: the line above will grant RPCS3 full r/w access to all USB devices by default. If this concerns you, you might want to limit it to only specific USB devices using:

SUBSYSTEM=="usb", ATTRS{idVendor}=="ABCD", ATTRS{idProduct}=="1234", MODE="0666"

Change idVendor and idProduct values to the VID/PID of the device you want to allow.

After this you must either:

1. restart your computer for these settings to apply or
2. run sudo udevadm control --reload-rules and replug in your controller

Configuring Instruments

First, right click your game and click Create Custom Gamepad Configuration. Then follow the instructions below:

• PS3/PS4/Wii Guitars: Use MMJoystick handler. Remap the following buttons:

  = Green Fret

  = Red Fret

  = Yellow Fret (GH) / Blue Fret (RB)

  = Blue Fret (GH) / Yellow Fret (RB)

  L1 = Orange Fret

  DPAD Up = Up Strum

  DPAD Down = Down Strum

  Right Stick Right = Whammy Bar

  L2 = Solo modifier (Rock Band only)

  R1 = Guitar tilt (Rock Band only)

• Xbox 360 Guitars: Use XInput handler. Remap by flipping/switching the Y and X buttons while leaving the rest untouched.

• PS3/Wii/Xbox 360 Drums: Use MMJoystick handler for PS3/Wii drums, and XInput handler for Xbox 360 drums.

  Change device class to Drums/Guitar Hero or Drums/Rock Band.

  • Remap the following buttons for Rock Band drums:

    = Green Pad

    = Red Pad

    = Blue Pad

    = Yellow Pad

    L1 = Foot Pedal

    DPAD = DPAD

  • For Rock Band Pro drums, also map the following buttons:

    L3 = Pad modifier

    R3 = Cymbal modifier

    R1 = Double bass pedal (Requires Rock Band 2 Deluxe mod or Rock Band 3)/Hi-hat pedal

  • For Guitar Hero drums, remap them the same way as Rock Band drums except:

    R1 = Orange Pad

• Wii/Xbox 360 Turntables: Right click your game and click Create Custom Configuration. In addition to setting your preferred custom configuration settings, in the I/O tab set DJ Hero emulated turntable to 1 controller (or 2 controllers if you are binding multiple turntables).

  For Xbox 360 turntables on Windows, you will need to calibrate the turntable using Windows's controller calibration. When prompted to calibrate the "D-Pad", you must spin the platter as hard as you can in both directions, and also move the platter to the other side of the mixer and spin the platter as hard as you can in both directions. After calibrating the platter, move the platter back to the desired side, continue calibrating the remaining axes (skip Z Axis, X Rotation is Effects Dial, Y Rotation is Crossfader), then Finish.

  Back in the custom gamepad configuration, use MMJoystick handler and change device class to DJ/DJ Hero Turntable.

  • Remap the following buttons:

  = Green Button

  = Red Button

  = Blue Button

  = Euphoria (shared with dedicated button at the top of the mixer)

  Right Stick Up = Crossfade Left

  Right Stick Down = Crossfade Right

  Right Stick Left = Effects Dial Left

  Right Stick Right = Effects Dial Right

  Left Stick Up = Scratch Up

  Left Stick Down = Scratch Down

  • The following bind is needed for the Calibration and Tutorial modes, but is otherwise optional:

  R1: Dedicated button at the top of the mixer.

  • The following binds are not needed, but documented for completeness:

  L1: Dedicated button at the top of the mixer.

  R2: Dedicated button at the top of the mixer.

• PS3 Turntables: Works through USB passthrough after following cellUsbd Set-up Instructions section above.

Notes:

• For guitars, change device class to Guitar/Guitar Hero or Guitar/Rock Band depending on the instrument and game.
• To use a drum and guitar at the same time you must create a profile for each of them.
• If remapping the buttons isn’t working, click the "Filter Noise" button in the lower left corner.
• If L2 is bound on a Guitar Hero guitar, you may erroneously auto-strum during solos in Rock Band games. Make sure the button isn't accidentally bound.
• Tilt on Guitar Hero guitars will not function in Rock Band games.

Skylanders Portal

For Skylanders, there exists an emulated Skylanders portal which can be used with the game if you do not own the device yourself.

To use the emulated Skylanders portal:

1. Go to Manage > Skylanders Portal
2. Click New and create a new file. That file represents a Skylanders figure and its stats, it will be automatically saved with each change to the figure in-game. You can use the combobox to choose which figure that file represents.

Note:

1. The emulated portal will not be enabled if you have a real Skylanders portal connected.
2. If the Skylander figure data generation is incomplete and the first time you use it, the game will either refuse it, or some games (such as Skylanders SWAP Force) will detect it as <corrupted> and offer to repair it. Once it has been repaired by a game which supports repairing, it will work perfectly on other Skylanders games as well.