The Last of Us: Difference between revisions

From RPCS3 Wiki
(→‎Special Notes: add missing comments)
(Keep spacing after the hash intact. this way, deleting the hash enables the patch without having to add any spacing or fixing formatting.)
Line 172: Line 172:
   tlou100_mlaa: &tlou100_mlaa
   tlou100_mlaa: &tlou100_mlaa
     - [ be16, 0x00a7a514, 0x9b83 ]    # store 0
     - [ be16, 0x00a7a514, 0x9b83 ]    # store 0
  #- [ be16, 0x00a51a8c, 0x4800 ]    # unconditonally branch to disable MLAA
  # - [ be16, 0x00a51a8c, 0x4800 ]    # unconditonally branch to disable MLAA
     - [ be16, 0x0092ddac, 0x4800 ]    # Skip memory check function
     - [ be16, 0x0092ddac, 0x4800 ]    # Skip memory check function
     - [ be32, 0x00ae5d4c, 0x38000000 ] # Green rain
     - [ be32, 0x00ae5d4c, 0x38000000 ] # Green rain
Line 369: Line 369:


   tlou111_devplus: &tlou111_devplus
   tlou111_devplus: &tlou111_devplus
     - [ be32, 0x012850e8, 0x00e8c3e7 ] # str ptr
     - [ be32, 0x012850e8, 0x00e8c3e7 ]
     - [ be32, 0x0128515c, 0x00e8c57f ] # str ptr
     - [ be32, 0x0128515c, 0x00e8c57f ]
     - [ be16, 0x00e8c318, 0x202b ] # _+
     - [ be16, 0x00e8c318, 0x202b ]
     - [ byte, 0x00e8c3e7, 42 ] # * in int
     - [ byte, 0x00e8c3e7, 42 ]
     - [ byte, 0x00e8c57f, 42 ] # * in int
     - [ byte, 0x00e8c57f, 42 ]
   # useless memory option replace with rendering
   # ptr
   # point addr from [] to [], this offsets 002dcc40 store 00 and onwards.
   # addi can't have more than 0x7fff of offset from base ptr
  # i.e [] now becomes [] and so on
     - [ be32, 0x0129732c, 0x015715f0 ]
     - [ be32, 0x0129732c, 0x015715f0 ] # pointer
     - [ be32, 0x002dcc40, 0x38bc00be ]
     - [ be32, 0x002dcc40, 0x38bc00be ] # disable vis
     - [ be32, 0x012973fc, 0x00ee0490 ]
     - [ be32, 0x012973fc, 0x00ee0490 ]
     - [ be16, 0x00ee0498, 0x5669 ] # capitalise visibility for
     - [ be16, 0x00ee0498, 0x5669 ]
     - [ be32, 0x002dcc74, 0x38bc06d9 ] # wireframe
     - [ be32, 0x002dcc74, 0x38bc06d9 ]
     - [ be32, 0x01297400, 0x00ee01d8 ]
     - [ be32, 0x01297400, 0x00ee01d8 ]
     - [ be32, 0x002dcca8, 0x38bc06da ] # see through
     - [ be32, 0x002dcca8, 0x38bc06da ]
     - [ be32, 0x01297404, 0x00ee01f0 ]
     - [ be32, 0x01297404, 0x00ee01f0 ]
     - [ be32, 0x002dccdc, 0x38bc06db ] # point mode
     - [ be32, 0x002dccdc, 0x38bc06db ]
     - [ be32, 0x01297408, 0x00ee0210 ]
     - [ be32, 0x01297408, 0x00ee0210 ]
     - [ be32, 0x002dcd10, 0x38bc04f4 ] # post on spu
     - [ be32, 0x002dcd10, 0x38bc04f4 ]
     - [ be32, 0x0129740c, 0x00f05a48 ]
     - [ be32, 0x0129740c, 0x00f05a48 ]
     - [ be32, 0x002dcd44, 0x38bc04de ] # motion blur
     - [ be32, 0x002dcd44, 0x38bc04de ]
     - [ be32, 0x01297410, 0x00f05618 ]
     - [ be32, 0x01297410, 0x00f05618 ]
     - [ be32, 0x002dcd78, 0x38bc04e1 ] # dof
     - [ be32, 0x002dcd78, 0x38bc04e1 ]
     - [ be32, 0x01297414, 0x00f05410 ]
     - [ be32, 0x01297414, 0x00f05410 ]
     - [ be32, 0x012974e4, 0x0135bfe8 ] # ptr
     - [ be32, 0x012974e4, 0x0135bfe8 ]
     - [ be64, 0x00ea8ba0, 0x456e61626c652050 ] # rename string
     - [ be64, 0x00ea8ba0, 0x456e61626c652050 ]
     - [ be32, 0x00ea8ba8, 0x61757365 ]
     - [ be32, 0x00ea8ba8, 0x61757365 ]
     - [ byte, 0x00ea8bac, 0 ] # term str
     - [ byte, 0x00ea8bac, 0 ]
     - [ be32, 0x01297418, 0x00e8d580 ]
     - [ be32, 0x01297418, 0x00e8d580 ]
     - [ byte, 0x00eeeef8, 0 ]
    - [ be32, 0x0129741c, 0x0157186e ] # bug! need fixing.
     - [ byte, 0x00eeef10, 0 ]
     - [ byte, 0x00eeeef8, 0]
     - [ byte, 0x00eeef28, 0 ]
     - [ byte, 0x00eeef10, 0]
     - [ byte, 0x00eeef50, 0 ]
     - [ byte, 0x00eeef28, 0]
     - [ byte, 0x00eeef50, 0]
     - [ be32, 0x012bf4a4, 0x00e8d520 ]
     - [ be32, 0x012bf4a4, 0x00e8d520 ]
     - [ be32, 0x012bf4a8, 0x00e8d550 ]
     - [ be32, 0x012bf4a8, 0x00e8d550 ]
Line 411: Line 411:
     - [ be64, 0x00e8d568, 0x20616e6420536d61 ]
     - [ be64, 0x00e8d568, 0x20616e6420536d61 ]
     - [ be64, 0x00e8d570, 0x7368657232343800 ]
     - [ be64, 0x00e8d570, 0x7368657232343800 ]
  # vram stats
     - [ be64, 0x00e8d580, 0x53686f7720437265 ]
     - [ be64, 0x00e8d580, 0x53686f7720437265 ]
     - [ be32, 0x00e8d588, 0x64697473 ]
     - [ be32, 0x00e8d588, 0x64697473 ]
   # console exclusive code, we don't need this due to post on spu off
   # console exclusive code, we don't need this due to post on spu off
    - [ be32, 0x0129741c, 0x0157186e ] # ptr
   #  - [ be32, 0x00aa9444, 0x38600001 ]
   #  - [ be32, 0x00aa9444, 0x38600001 ] # remove branch and set r3 to 1
   #  - [ be16, 0x00aa9464, 0x9869 ]
   #  - [ be16, 0x00aa9464, 0x9869 ]     # load from r3
    
    
   gpulightingnotes: &gpulightingnotes "Uses GPU (RSX) path for lighting effects,\nThis path is incomplete results in some missing effects. (Volumetric lighting)"
   gpulightingnotes: &gpulightingnotes "Uses GPU (RSX) path for lighting effects,\nThis path is incomplete results in some missing effects. (Volumetric lighting)"
Line 739: Line 737:
     Patch Version: 1.0
     Patch Version: 1.0
     Patch:
     Patch:
       - [ be32, 0x012850f8, 0x0148AE18 ] # ptr
       - [ be32, 0x012850f8, 0x0148AE18 ]
       - [ be16, 0x0135dcac, 0x3f80 ] # avoid assertion
       - [ be16, 0x0135dcac, 0x3f80 ]
       - [ be64, 0x00e8c418, 0x4E5043204D6F6465 ] # string replace
       - [ be64, 0x00e8c418, 0x4E5043204D6F6465 ]
       - [ be32, 0x00e8c420, 0x6C205363 ]
       - [ be32, 0x00e8c420, 0x6C205363 ]
       - [ be16, 0x00e8c424, 0x616C ]
       - [ be16, 0x00e8c424, 0x616C ]
       - [ be64, 0x00e8c426, 0x653A000000000000 ] # 1 byte overlap
       - [ be64, 0x00e8c426, 0x653A000000000000 ]
}}
}}


Revision as of 08:30, 31 January 2021

The Last of Us
Developer(s) Naughty Dog
Publisher(s) Sony Computer Entertainment
Release date(s) June 14, 2013
Release type PlayStation exclusive
Genre(s) Action, Adventure, Survival horror
Mode(s) Single-player, Multiplayer
GameID(s) BCES01584 (IRD), BCES01585 (IRD), BCUS98174 (IRD), NPEA00435, BCAS20270 (IRD), BCJS37010 (IRD), NPJA00096, NPUA80960
Left Behind
NPEA00521, NPJA00129, NPUA81175, NPHA80279
Demo
Quick links Check Compatibility
Open Issues
Search Google
Wikipedia Page

The Last of Us is a game where players control Joel, a smuggler tasked with escorting a teenage girl, Ellie, across a post-apocalyptic United States. The Last of Us is played from a third-person perspective. Players use firearms and improvised weapons, and can use stealth to defend against hostile humans and cannibalistic creatures infected by a mutated strain of the Cordyceps fungus. In the online multiplayer mode, up to eight players engage in cooperative and competitive gameplay.

Development of The Last of Us began in 2009, soon after the release of Naughty Dog's previous game, Uncharted 2: Among Thieves. For the first time in the company's history, Naughty Dog split into two teams; while one team developed Uncharted 3: Drake's Deception, the other half developed The Last of Us. The relationship between Joel and Ellie became the central focus of the game, with all other elements developed around it. Actors Troy Baker and Ashley Johnson portrayed Joel and Ellie respectively through voice and motion capture, and assisted creative director Neil Druckmann with the development of the characters and story. The original score was composed and performed by Gustavo Santaolalla.

Following its announcement in December 2011, The Last of Us was widely anticipated. Upon release, it received critical acclaim, with praise directed at its narrative, gameplay, visual and sound design, characterization, and depiction of female characters. The Last of Us became one of the best-selling games on the PlayStation 3, selling over 1.3 million units in its first week and 17 million by April 2018. After the game's release, Naughty Dog released several downloadable content additions. The Last of Us: Left Behind adds a single-player campaign following Ellie and her best friend Riley.

Configuration

Options that deviate from RPCS3's default settings and provide the best experience with this title are listed below.

GPU configuration

Setting Option Notes
Framelimit 60 Enabling framelimit prevents rare crashes during loading screens when framerate may exceed 500FPS. Alternatively, enable VSync on a 60Hz monitor for the same effect.
Resolution scale 100 Resolution scaling is only supported when the MLAA patch is enabled.
Resolution scale threshold 1x1 When using Resolution scaling above 100%, this must be set to 1x1 otherwise some effects like lens flare wil be missing.
Write color buffers On Only needed if you're not using MLAA patch. Fixes Green Rain and particle issues. Slightly reduces performance.

Advanced configuration

Setting Option Notes
Accurate RSX reservation access On To be enabled on systems that do not have TSX.
PPU LLVM Java mode handling Provides additional gameplay stability and stops frequent trap errors from occurring.
Read color buffers On Fixes graphical issues when certain patches are enabled.

Known Issues

This game is currently not playable.

Special Notes

Patches

Anchors:
  # Since we only change store reg and branch, we don't need to patch last 2 bytes again.
  tlou100_mlaa: &tlou100_mlaa
    - [ be16, 0x00a7a514, 0x9b83 ]     # store 0
  #  - [ be16, 0x00a51a8c, 0x4800 ]     # unconditonally branch to disable MLAA
    - [ be16, 0x0092ddac, 0x4800 ]     # Skip memory check function
    - [ be32, 0x00ae5d4c, 0x38000000 ] # Green rain
    - [ be32, 0x00a2c4f0, 0x38000000 ] # Green rain
    - [ be32, 0x00a2c4fc, 0x38000000 ] # Green rain
    - [ be32, 0x00a58da8, 0x60000000 ] # skip assert: x + w <= width && y + h <= height
  
  # Special thanks to HdHereidme for debug menu, Smasher248 for inital memory addresses and Skye Mods for mesh trimming 
  # address. Without them this patch wouldn't have been possible.
  # This patch cycles through various post-processing modes. Values accepted are:
  #    0 = None
  #    1 = Bloom
  #    2 = Depth of Field
  #    3 = ??? (Tonemapping)
  #    4 = Bloom & Depth of Field
  #    5 = Bloom & Depth of Field & Tonemapping (Default)
  
  tlou100_post: &tlou100_post
  #  - [ be32, 0x00a7991c, 0x38000003 ] # Post-processing modes                    (mem address: 0x14C79C7)
    - [ be32, 0x0093e300, 0xc0090990 ] # load e190 with 0
    - [ be32, 0x0093e30c, 0xc1890990 ] # load e198 with 0f
    - [ be32, 0x0093e394, 0xc0090990 ] # load e1a0 with 0f
  
  tlou100_mesh: &tlou100_mesh
    - [ be16, 0x00923a94, 0x9809 ]     # Disable Mesh trimming       (r3  => r0 ) (mem address: 0x142C584)
  
  # Many settings below are enabled/disabled in sub_A7A340. In this subroutine,
  #    r6  = 2
  #    r27 = 1
  #    r28 = 0
  # and these are stored into some memory blob to represent settings. Most values can be switched by just changing the
  # source register from one to the other, though some are words and some are bytes, so be careful.
  
  tlou100_ssao: &tlou100_ssao
    - [ be16, 0x00a7a470, 0x9b83 ]     # Disable SSAO                (r27 => r28) (mem address: 0x14C7C0F)
  
  tlou100_mb: &tlou100_mb
    - [ be16, 0x00a7a4d4, 0x9b83 ]     # Disable motion blur         (r27 => r28) (mem address: 0x14C7C2E)
  
  tlou100_dof: &tlou100_dof
    - [ be16, 0x00a7a4e0, 0x9b83 ]     # Disable depth of field      (r27 => r28) (mem address: 0x14C7C31)
  
  tlou100_dbv: &tlou100_dbv
    - [ be16, 0x00a7a760, 0x9b63 ]     # Depth buffer viewport       (r28 => r27) (mem address: 0x14C7E9D)
  
  tlou100_dbf: &tlou100_dbf
    - [ be16, 0x00a7a7ac, 0x9b83 ]     # Depth border fix            (r27 => r28) (mem address: 0x14C7EC1)
  
  tlou100_db: &tlou100_db
    - [ be16, 0x00a7a7b8, 0x90e3 ]     # Depth buffer                (r27 => r6 ) (mem address: 0x14C7F93)
    - [ be16, 0x00a516ec, 0x4800 ]     # Cabin resort crash fix
  
  tlou100_speed: &tlou100_speed
    - [ be16, 0x00a7a6b8, 0x9383 ]     # Speedboost                               (mem address: 0x14c7e5f)
  
  tlou100_spulighting: &tlou100_spulighting
    - [ be16, 0x00afeb24, 0x4800 ]
  
  tlou111_mlaa: &tlou111_mlaa
  #  - [ be16, 0x00aaa040, 0x9b83 ]     # store 0
    - [ be16, 0x00a80350, 0x4800 ]     # unconditonally branch to disable MLAA
    - [ be16, 0x0095b8f8, 0x4800 ]     # Skip memory check function
    - [ be32, 0x00b0e140, 0x38000000 ] # Green rain
    - [ be32, 0x00a5bc38, 0x38000000 ] # Green rain
    - [ be32, 0x00a5bc44, 0x38000000 ] # Green rain
    - [ be32, 0x00a877e0, 0x60000000 ] # skip assert: x + w <= width && y + h <= height
    - [ be32, 0x0096be58, 0xc1890990 ] # Cargo fix
    - [ be32, 0x0096bee0, 0xc0090990 ] # Reticle bloom
  # Dof correction patch
    - [ be32, 0x0096b8b0, 0x48114aa5 ] #Call1
    - [ be32, 0x0096b8d4, 0x48114a91 ] #Call2
    - [ be32, 0x00a3a584, 0x48045df1 ] #Call3
  # Func 1 Overall DoF 1
    - [ be32, 0x00a80354, 0xc09c0aa4 ] #Load f4 e294
    - [ be32, 0x00a80358, 0xc27e0424 ] #f19 = 0.3
    - [ be32, 0x00a8035c, 0xec8404f2 ] #f4*f19
    - [ be32, 0x00a80360, 0x4e800020 ] #Return
  # Func 2 Cutscene Dof
    - [ be32, 0x00a80364, 0xc01c0aac ] #Load f0 e29c
    - [ be32, 0x00a80368, 0xc17e1b64 ] #f11 = 0.75
    - [ be32, 0x00a8036c, 0xec0002f2 ] #f0*f11
    - [ be32, 0x00a80370, 0x4e800020 ] #Return
  # Func 3 Overall Dof 2
    - [ be32, 0x00a80374, 0x3d200151 ] #r9 = 1510000
    - [ be32, 0x00a80378, 0x3929e29c ] #r9 = 150e29c
    - [ be32, 0x00a8037c, 0x80080014 ] #Load pattern to r0
    - [ be32, 0x00a80380, 0x7f804800 ] #Compare r0 to r9
    - [ be32, 0x00a80384, 0x409e0010 ]
    - [ be32, 0x00a80388, 0xc01e137c ] #f0 = 0.3
    - [ be32, 0x00a8038c, 0xd008000c ] #Store f0
    - [ be32, 0x00a80390, 0x48000008 ]
    - [ be32, 0x00a80394, 0xd3e8000c ] #Default store
    - [ be32, 0x00a80398, 0x4e800020 ] #Return
  # Bloom correction patch
    - [ be32, 0x0096be54, 0x48114549 ] #Call
    - [ be32, 0x00a8039c, 0xc1a909a4 ] #Load f13
    - [ be32, 0x00a803a0, 0xc19e059c ] #f12 = 0.69
    - [ be32, 0x00a803a4, 0x808909a8 ] #r4 unique value e198
    - [ be32, 0x00a803a8, 0x2f840000 ] #if r4 <= 0
    - [ be32, 0x00a803ac, 0x409d0058 ] #Skip to Main menu
  # Bills town Bloater and escape(2)
    - [ be32, 0x00a803b0, 0x3ca03ba4 ] #r5 = 3ba40000
    - [ be32, 0x00a803b4, 0x7f842800 ] #compare r4 to r5
    - [ be32, 0x00a803b8, 0x419c0074 ] #go to Patch if less
  # Bills town Cemetery(1)
    - [ be32, 0x00a803bc, 0x808909a4 ] #r4 unique value e194
    - [ be32, 0x00a803c0, 0x3ca03e80 ] #r5 = 3e800000
    - [ be32, 0x00a803c4, 0x7f842800 ] #compare r4 to r5
    - [ be32, 0x00a803c8, 0x419c0068 ] #go to Patch if less
  # Bills town main street(2)
    - [ be32, 0x00a803cc, 0x3ca04026 ] #r5 = 40260000
    - [ be32, 0x00a803d0, 0x38a56666 ] #r5 = 40266666
    - [ be32, 0x00a803d4, 0x7f842800 ] #compare r4 to r5
    - [ be32, 0x00a803d8, 0x419e0054 ] #go to Patch if ==
  # Bills town Trap(2)
    - [ be32, 0x00a803dc, 0x3ca0403d ] #r5 = 403d0000
    - [ be32, 0x00a803e0, 0x38a5e4e2 ] #r5 = 403ce4e2
    - [ be32, 0x00a803e4, 0x7f842800 ] #compare r4 to r5
    - [ be32, 0x00a803e8, 0x419e0044 ] #go to Patch if ==
  # Bills Town intro check(2)
    - [ be32, 0x00a803ec, 0x808909bc ] #r4 unique value e1ac
    - [ be32, 0x00a803f0, 0x3ca04007 ] #r5 = 40070000
    - [ be32, 0x00a803f4, 0x38a50a3d ] #r5 = 40070a3d
    - [ be32, 0x00a803f8, 0x7f842800 ] #compare r4 to r5
    - [ be32, 0x00a803fc, 0x419e0030 ] #go to Patch if ==
    - [ be32, 0x00a80400, 0x4e800020 ] #Return
  # Patch Menu/Ending level
    - [ be32, 0x00a80404, 0x808909a0 ] #r4 unique value e190
    - [ be32, 0x00a80408, 0x3ca03f8d ] #r5 = 3f8d0000
    - [ be32, 0x00a8040c, 0x38a52f6f ] #r5 = 3f8d2f6f
    - [ be32, 0x00a80410, 0x7f842800 ] #compare r4 to r5
    - [ be32, 0x00a80414, 0x419e0010 ] #Patch menu
    - [ be32, 0x00a80418, 0x80a909a4 ] #r5 unique value e194
    - [ be32, 0x00a8041c, 0x7f842800 ] #compare r4 to r5
    - [ be32, 0x00a80420, 0x4c9e0020 ] #Return (bnelr)
    - [ be32, 0x00a80424, 0xc19e034c ] #f12 = 0.5
    - [ be32, 0x00a80428, 0x48000008 ] #go to Patch
  # Patch function
    - [ be32, 0x00a8042c, 0xedad0332 ] #f13=f13*f12
    - [ be32, 0x00a80430, 0xec000332 ] #f0=f0*f12
    - [ be32, 0x00a80434, 0x4e800020 ] #Return
  
  # Special thanks to HdHereidme for debug menu, Smasher248 for inital memory addresses and Skye Mods for mesh trimming 
  # address. Without them this patch wouldn't have been possible.
  # This patch cycles through various post-processing modes. Values accepted are:
  #    0 = None
  #    1 = Bloom
  #    2 = Depth of Field
  #    3 = ??? (Tonemapping)
  #    4 = Bloom & Depth of Field
  #    5 = Bloom & Depth of Field & Tonemapping (Default)
  
  tlou111_post: &tlou111_post
  #  - [ be32, 0x00aa944c, 0x38000003 ] # Post-processing modes                    (mem address: 0x1571867)
    - [ be32, 0x0096be4c, 0xc0090990 ] # load e190 with 0
    - [ be32, 0x0096BE58, 0xc1890990 ] # load e198 with 0
    - [ be32, 0x0096BEE0, 0xc0090990 ] # load e1a0 with 0
  
  tlou111_mesh: &tlou111_mesh
    - [ be16, 0x009515d8, 0x9809 ]     # Disable Mesh trimming       (r3  => r0 ) (mem address: 0x14A9604)
  
  # Many settings below are enabled/disabled in sub_AA9E6C. In this subroutine,
  #    r6  = 2
  #    r27 = 1
  #    r28 = 0
  # and these are stored into some memory blob to represent settings. Most values can be switched by just changing the
  # source register from one to the other, though some are words and some are bytes, so be careful.
  
  tlou111_ssao: &tlou111_ssao
    - [ be16, 0x00aa9f9c, 0x9b83 ] #Disable SSAO

  tlou111_mb: &tlou111_mb
    - [ be32, 0x0096aa94, 0x480000e0 ] # Disable motion blur
  
  tlou111_dof: &tlou111_dof
    - [ be16, 0x00aaa00c, 0x9b83 ]     # Disable depth of field      (r27 => r28) (mem address: 0x1571AD1)
  
  tlou111_dbv: &tlou111_dbv
    - [ be16, 0x00aaa290, 0x9b63 ]     # Depth buffer viewport       (r28 => r27) (mem address: 0x1571D41)
  
  tlou111_dbf: &tlou111_dbf
    - [ be16, 0x00aaa2d8, 0x9b83 ]     # Depth border fix            (r27 => r28) (mem address: 0x1571D65)
  
  tlou111_db: &tlou111_db
    - [ be16, 0x00aaa2e4, 0x90c3 ]     # Depth buffer                (r27 => r6 ) (mem address: 0x1571E37)
    - [ be16, 0x00a7ffac, 0x4800 ]     # Cabin resort crash fix
  
  tlou111_speed: &tlou111_speed
    - [ be16, 0x00aaa1e8, 0x9383 ]     # Speedboost                               (mem address: 0x1571d03)
  
  tlou111_spulighting: &tlou111_spulighting
    - [ be16, 0x00b294ec, 0x4800 ]

  tlou111_torch: &tlou111_torch
    - [ be32, 0x009609f4, 0x60000000 ] # Torch lights disable

  tlou111_devplus: &tlou111_devplus
    - [ be32, 0x012850e8, 0x00e8c3e7 ]
    - [ be32, 0x0128515c, 0x00e8c57f ]
    - [ be16, 0x00e8c318, 0x202b ]
    - [ byte, 0x00e8c3e7, 42 ]
    - [ byte, 0x00e8c57f, 42 ]
  # ptr
  # addi can't have more than 0x7fff of offset from base ptr
    - [ be32, 0x0129732c, 0x015715f0 ]
    - [ be32, 0x002dcc40, 0x38bc00be ]
    - [ be32, 0x012973fc, 0x00ee0490 ]
    - [ be16, 0x00ee0498, 0x5669 ]
    - [ be32, 0x002dcc74, 0x38bc06d9 ]
    - [ be32, 0x01297400, 0x00ee01d8 ]
    - [ be32, 0x002dcca8, 0x38bc06da ]
    - [ be32, 0x01297404, 0x00ee01f0 ]
    - [ be32, 0x002dccdc, 0x38bc06db ]
    - [ be32, 0x01297408, 0x00ee0210 ]
    - [ be32, 0x002dcd10, 0x38bc04f4 ]
    - [ be32, 0x0129740c, 0x00f05a48 ]
    - [ be32, 0x002dcd44, 0x38bc04de ]
    - [ be32, 0x01297410, 0x00f05618 ]
    - [ be32, 0x002dcd78, 0x38bc04e1 ]
    - [ be32, 0x01297414, 0x00f05410 ]
    - [ be32, 0x012974e4, 0x0135bfe8 ]
    - [ be64, 0x00ea8ba0, 0x456e61626c652050 ]
    - [ be32, 0x00ea8ba8, 0x61757365 ]
    - [ byte, 0x00ea8bac, 0 ]
    - [ be32, 0x01297418, 0x00e8d580 ]
    - [ be32, 0x0129741c, 0x0157186e ] # bug! need fixing.
    - [ byte, 0x00eeeef8, 0]
    - [ byte, 0x00eeef10, 0]
    - [ byte, 0x00eeef28, 0]
    - [ byte, 0x00eeef50, 0]
    - [ be32, 0x012bf4a4, 0x00e8d520 ]
    - [ be32, 0x012bf4a8, 0x00e8d550 ]
  # str
    - [ be64, 0x00e8d520, 0x437265646974733a ]
    - [ be64, 0x00e8d550, 0x4d61646520627920 ]
    - [ be64, 0x00e8d558, 0x696c6c7573696f6e ]
    - [ be64, 0x00e8d560, 0x2c20467265616b6f ]
    - [ be64, 0x00e8d568, 0x20616e6420536d61 ]
    - [ be64, 0x00e8d570, 0x7368657232343800 ]
    - [ be64, 0x00e8d580, 0x53686f7720437265 ]
    - [ be32, 0x00e8d588, 0x64697473 ]
  # console exclusive code, we don't need this due to post on spu off
  #  - [ be32, 0x00aa9444, 0x38600001 ]
  #  - [ be16, 0x00aa9464, 0x9869 ]
  
  gpulightingnotes: &gpulightingnotes "Uses GPU (RSX) path for lighting effects,\nThis path is incomplete results in some missing effects. (Volumetric lighting)"
  
  spulightingnotes: &spulightingnotes "Removes some broken effects and improve performance."
  
  debugmenunotes: &debugmenunotes "L3 + Start = Dev Menu\nL3 + Select = Quick Menu\nL3 + Triangle = FPS Text\nL3 + R3 = Debug Fly"
  
  fpsnotes: &fpsnotes "Unlocks FPS without any special settings.\nGame may crash above 500FPS in loading screen."
  
  tloumlaanotes: &tloumlaanotes "Last modified: Dec 28 2020\n\nAllows for the use of Resolution Scaling and improves performance.\nVersion 2.0 fixes crashes introduced in the original patch.\nVersion 3.0 Fixes the Green Rain in more areas.\nVersion 4.0 Fixes high levels of Bloom in some areas. (1.11 Only)\nKnown issues: Non working listen mode"
  
  tlou100_title: &tlou100_title
    "The Last of Us":
      BCES01584: [ 01.00 ]
      BCES01585: [ 01.00 ]
      BCUS98174: [ 01.00 ]
      BCJS37010: [ 01.00 ]
      BCAS20270: [ 01.00 ]
      NPEA00435: [ 01.00 ]
      NPUA80960: [ 01.00 ]
  
  tlou111_title: &tlou111_title
    "The Last of Us":
      BCES01584: [ 01.11 ]
      BCES01585: [ 01.11 ]
      BCUS98174: [ 01.11 ]
      BCJS37010: [ 01.11 ]
      BCAS20270: [ 01.11 ]
      NPEA00435: [ 01.11 ]
      NPUA80960: [ 01.11 ]

PPU-9df60dc1aa5005a0c80e9066e4951dc0471553e6:
  Disable in-built MLAA:
    Games: *tlou100_title
    Author: Whatcookie
    Notes: *tloumlaanotes
    Patch Version: 3.0
    Patch:
      - [ load, *tlou100_mlaa ]
  Disable Bloom:
    Games: *tlou100_title
    Author: JohnHolmesII, ZEROx, illusion, Juhn
    Notes: 
    Patch Version: 1.0
    Group: Bloom
    Patch:
      - [ load, *tlou100_post ]
  Disable Mesh trimming:
    Games: *tlou100_title
    Author: JohnHolmesII, ZEROx, illusion, Juhn
    Notes: 
    Patch Version: 1.0
    Patch:
      - [ load, *tlou100_mesh ]
  Disable SSAO:
    Games: *tlou100_title
    Author: JohnHolmesII, ZEROx, illusion, Juhn
    Notes: 
    Patch Version: 1.0
    Patch:
      - [ load, *tlou100_ssao ]
  Disable Motion Blur:
    Games: *tlou100_title
    Author: JohnHolmesII, ZEROx, illusion, Juhn
    Notes: 
    Patch Version: 1.0
    Patch:
      - [ load, *tlou100_mb ]
  Disable Depth of Field:
    Games: *tlou100_title
    Author: JohnHolmesII, ZEROx, illusion, Juhn
    Notes: 
    Patch Version: 1.0
    Patch:
      - [ load, *tlou100_dof ]
  Depth buffer viewport:
    Games: *tlou100_title
    Author: JohnHolmesII, ZEROx, illusion, Juhn
    Notes: 
    Patch Version: 1.0
    Patch:
      - [ load, *tlou100_dbv ]
  Depth border fix:
    Games: *tlou100_title
    Author: JohnHolmesII, ZEROx, illusion, Juhn
    Notes:
    Patch Version: 1.0
    Patch:
      - [ load, *tlou100_dbf ]
  Enable GPU Lighting:
    Games: *tlou100_title
    Author: JohnHolmesII, ZEROx, illusion, Juhn
    Notes: *gpulightingnotes
    Patch Version: 1.0
    Group: Lighting
    Patch:
      - [ load, *tlou100_db ]
  Speedboost:
    Games: *tlou100_title
    Author: ZEROx, illusion
    Notes: Improves performance in certain areas. May cause issues.
    Patch Version: 1.0
    Patch:
      - [ load, *tlou100_speed ]
  Disable SPU lighting:
    Games: *tlou100_title
    Author: ZEROx
    Notes: *spulightingnotes
    Patch Version: 1.0
    Group: Lighting
    Patch:
      - [ load, *tlou100_spulighting ]
  Debug Menu:
    Games: *tlou100_title
    Author: dron_3, HdHereidme, illusion
    Notes: *debugmenunotes
    Patch Version: 1.01
    Patch:
      - [ be16, 0x0003b2a0, 0x419e ]
      - [ byte, 0x0003b2c3, 1 ]
      - [ be16, 0x009acbde, 0x2db6 ]
      - [ be16, 0x009acbe6, 0x2db6 ]
  21:9 Aspect Ratio:
    Games: *tlou100_title
    Author: illusion
    Notes: HUD Elements will be stretched. Users need to enable the "Stretch to Display Area" option in RPCS3 for this patch to work.
    Patch Version: 1.0
    Patch:
      - [ be32, 0x000325B8, 0x60000000 ] # nop write for ar float
      - [ be32, 0x14AEBD0,  0x3ED70A3D ] # ar float
      - [ be32, 0x128F2F4,  0x3F400000 ]
  Unlock FPS:
    Games: *tlou100_title
    Author: illusion
    Notes: *fpsnotes
    Patch Version: 1.0
    Patch:
      - [ be32, 0x00036AB8, 0x38A00000 ]
  Bloom High:
    Games: *tlou100_title
    Author: ZEROx, illusion
    Notes: 
    Patch Version: 1.0
    Group: Bloom
    Patch:
      - [ be32, 0x0093e300, 0xc01e1b64 ] # load e190 with 0.75f
      - [ be32, 0x0093e30c, 0xc1890990 ] # load e198 with 0f
      - [ be32, 0x0093e394, 0xc0090990 ] # load e1a0 with 0f
  Bloom Medium:
    Games: *tlou100_title
    Author: ZEROx, illusion
    Notes: 
    Patch Version: 1.0
    Group: Bloom
    Patch:
      - [ be32, 0x0093e300, 0xc01e034c ] # load e190 with 0.5f
      - [ be32, 0x0093e308, 0xc1be0e14 ] # load e194 with 0.25f
      - [ be32, 0x0093e30c, 0xc1890990 ] # load e198 with 0f
      - [ be32, 0x0093e394, 0xc0090990 ] # load e1a0 with 0f
  Bloom Low:
    Games: *tlou100_title
    Author: ZEROx, illusion
    Notes: 
    Patch Version: 1.0
    Group: Bloom
    Patch:
      - [ be32, 0x0093e300, 0xc01e0e14 ] # load e190 with 0.25f
      - [ be32, 0x0093e308, 0xc1be0e14 ] # load e194 with 0.25f
      - [ be32, 0x0093e30c, 0xc1890990 ] # load e198 with 0f
      - [ be32, 0x0093e394, 0xc0090990 ] # load e1a0 with 0f
  Bloom Default:
    Games: *tlou100_title
    Author: ZEROx, illusion
    Notes: Replicates Bloom settings with MLAA Enabled. (In Game Only)
    Patch Version: 1.0
    Group: Bloom
    Patch:
      - [ be32, 0x0093e30c, 0xc1890990 ] # load e198 with 0f
      - [ be32, 0x0093e394, 0xc0090990 ] # load e1a0 with 0f

PPU-120fb71f7352d62521c639b0e99f960018c10a56:
  Disable in-built MLAA:
    Games: *tlou111_title
    Author: Whatcookie, illusion, ZEROx
    Notes: *tloumlaanotes
    Patch Version: 4.0
    Patch:
      - [ load, *tlou111_mlaa ]
  Disable Bloom:
    Games: *tlou111_title
    Author: JohnHolmesII, ZEROx, illusion, Juhn
    Notes: 
    Patch Version: 1.0
    Group: Bloom
    Patch:
      - [ load, *tlou111_post ]
  Disable Mesh trimming:
    Games: *tlou111_title
    Author: JohnHolmesII, ZEROx, illusion, Juhn
    Notes: 
    Patch Version: 1.0
    Patch:
      - [ load, *tlou111_mesh ]
  Disable SSAO:
    Games: *tlou111_title
    Author: JohnHolmesII, ZEROx, illusion, Juhn
    Notes: 
    Patch Version: 1.1
    Patch:
      - [ load, *tlou111_ssao ]
  Disable Motion Blur:
    Games: *tlou111_title
    Author: JohnHolmesII, ZEROx, illusion, Juhn
    Notes: 
    Patch Version: 1.0
    Patch:
      - [ load, *tlou111_mb ]
  Disable Depth of Field:
    Games: *tlou111_title
    Author: JohnHolmesII, ZEROx, illusion, Juhn
    Notes: 
    Patch Version: 1.0
    Patch:
      - [ load, *tlou111_dof ]
  Depth buffer viewport:
    Games: *tlou111_title
    Author: JohnHolmesII, ZEROx, illusion, Juhn
    Notes: 
    Patch Version: 1.0
    Patch:
      - [ load, *tlou111_dbv ]
  Depth border fix:
    Games: *tlou111_title
    Author: JohnHolmesII, ZEROx, illusion, Juhn
    Notes: 
    Patch Version: 1.0
    Patch:
      - [ load, *tlou111_dbf ]
  Enable GPU Lighting:
    Games: *tlou111_title
    Author: JohnHolmesII, ZEROx, illusion, Juhn
    Notes: *gpulightingnotes
    Patch Version: 1.0
    Group: Lighting
    Patch:
      - [ load, *tlou111_db ]
  Speedboost:
    Games: *tlou111_title
    Author: ZEROx, illusion
    Notes: Improves performance in certain areas. May cause issues.
    Patch Version: 1.0
    Patch:
      - [ load, *tlou111_speed ]
  Disable SPU Lighting:
    Games: *tlou111_title
    Author: ZEROx
    Notes: *spulightingnotes
    Patch Version: 1.0
    Group: Lighting
    Patch:
      - [ load, *tlou111_spulighting ]
  Disable Torch shadow maps:
    Games: *tlou111_title
    Author: ZEROx
    Notes: Disables incorrectly rendered type of shadow maps.
    Patch Version: 1.0
    Patch:
      - [ load, *tlou111_torch ]
  Debug Menu:
    Games: *tlou111_title
    Author: dron_3, HdHereidme, illusion
    Notes: *debugmenunotes
    Patch Version: 1.01
    Patch:
      - [ be16, 0x0003bf9c, 0x419e ]
      - [ byte, 0x0003bfbf, 1 ]
      - [ be16, 0x009da99a, 0x2db6 ]
      - [ be16, 0x009da9a2, 0x2db6 ]
  Infinite flashlight battery:
    Games: *tlou111_title
    Author: bungholio, ZEROx
    Notes: This patch is usefull for people who play with something other than DualShock3/4.\nNormaly flashlight battery drains after ~3600 frames, patch disables battery drain, No drain - no controller shake.
    Patch Version: 1.0
    Patch:
      - [ be32, 0x006acbc8, 0x60000000 ]
  21:9 Aspect Ratio:
    Games: *tlou111_title
    Author: illusion
    Notes: HUD Elements will be stretched. Users need to enable the "Stretch to Display Area" option in RPCS3 for this patch to work.
    Patch Version: 1.0
    Patch:
      - [ be32, 0x0003556C, 0x60000000 ] # nop write for ar float
      - [ be32, 0x1558A50,  0x3ED70A3D ] # ar float
      - [ be32, 0x12C1964,  0x3F400000 ]
  Unlock FPS:
    Games: *tlou111_title
    Author: illusion
    Notes: *fpsnotes
    Patch Version: 1.0
    Patch:
      - [ be32, 0x00039D08, 0x38A00000 ]
  Dev Menu Plus:
    Games: *tlou111_title
    Author: illusion, Freako, Smasher248
    Notes: "Last modified: 10 December 2020\n\nReplaces some useless options in Memory Tab with rendering features.\n\nWireframe modes currently does not work on the emulator."
    Patch Version: 1.0
    Patch:
      - [ load, *tlou111_devplus ]
  Disable Pause in Dev Menu:
    Games: *tlou111_title
    Author: illusion, Freako
    Notes: 
    Patch Version: 1.0
    Patch:
      - [ be16, 0x009d2114, 0x9803 ]
  NPC Model Scale in Clock Menu:
    Games: *tlou111_title
    Author: illusion
    Notes: 
    Patch Version: 1.0
    Patch:
      - [ be32, 0x012850f8, 0x0148AE18 ]
      - [ be16, 0x0135dcac, 0x3f80 ]
      - [ be64, 0x00e8c418, 0x4E5043204D6F6465 ]
      - [ be32, 0x00e8c420, 0x6C205363 ]
      - [ be16, 0x00e8c424, 0x616C ]
      - [ be64, 0x00e8c426, 0x653A000000000000 ]

Canary Patches

Anchors:
  tlou100_spucrashfix: &tlou100_spucrashfix
    - [ be16, 0x1291C0C, 0x3F00 ]      # set float to 0.5 for sun pos(?)
    - [ be32, 0x0093E8B4, 0xC0490E57 ] # Dev Menu -> Rendering -> HDR Tonemapping -> display brightness -1.404
    - [ be32, 0x00335DB8, 0x60000000 ] # nop reset in option menu

  tlou111_spucrashfix: &tlou111_spucrashfix
    - [ be16, 0x12C41A4, 0x3F00 ]      # set float to 0.5 for sun pos(?)
    - [ be32, 0x0096C400, 0xC0490E57 ] # Dev Menu -> HDR Tonemapping -> display brightness -1.404
    - [ be32, 0x0034AFB8, 0x60000000 ] # nop reset in option menu

  spucrashnotes: &spucrashnotes "This patch is now obsolete. Better implementation has been implemented into MLAA Patch.\nOld description:\nThis patch attempts to addresses issues caused by the MLAA patch causing crashes during the following subchapters:\nBill's Town: High School Escape\nPittsburgh: Financial District, Escape the City\nUniversity: Go Big Horns\n\nKnown Issues:\nMenu too dark.\nSun in wrong position.\nLighting flickers during sun position change."

  tlou100_title: &tlou100_title
    "The Last of Us":
      BCES01584: [ 01.00 ]
      BCES01585: [ 01.00 ]
      BCUS98174: [ 01.00 ]
      BCJS37010: [ 01.00 ]
      BCAS20270: [ 01.00 ]

  tlou111_title: &tlou111_title
    "The Last of Us":
      BCES01584: [ 01.11 ]
      BCES01585: [ 01.11 ]
      BCUS98174: [ 01.11 ]
      BCJS37010: [ 01.11 ]
      BCAS20270: [ 01.11 ]

PPU-9df60dc1aa5005a0c80e9066e4951dc0471553e6:
  SPU Crash Workaround:
    Games: *tlou100_title
    Author: illusion, ZEROx
    Notes: *spucrashnotes
    Patch Version: 1.0
    Patch:
      - [ load, *tlou100_spucrashfix ]

PPU-120fb71f7352d62521c639b0e99f960018c10a56:
  SPU Crash Workaround:
    Games: *tlou111_title
    Author: illusion, ZEROx
    Notes: *spucrashnotes
    Patch Version: 1.0
    Patch:
      - [ load, *tlou111_spucrashfix ]
Retrieved from "https://wiki.rpcs3.net/index.php?title=The_Last_of_Us&oldid=18972"